Detailed tutorial on installing CentOS system from USB flash drive
02 Install CentOS system from U disk
Install CentOS
-
Insert the prepared CentOS system installation USB disk into the computer, select the USB disk to boot when booting (use Baidu by yourself, boot into the BIOS to set the USB boot method)
-
After selecting the USB disk to boot, jump to the CentOS installation page, as shown below:
-
can be selected by pressing the up and down buttons. The default is Install CentOS 7; click the Enter key to jump to the installation page, as shown in the figure below, scroll down to the bottom, find the "Chinese" option, and click to select; then click "Continue" ”
4. Installation source: local media, software selection: GNOME desktop (if the default visual desktop is not visible, it is just the command line), installation location: select your hard disk, automatically allocate (the largest memory Yes, you can also assign it (the default is automatic), network and host name: open (the default is closed)
-
Select the installation location; select the system installation disk,
-
Software selection, click Software selection, jump to the picture below, select GNOME desktop
5. After the selection in step 4 above is completed, as shown in the picture below: Click to start the installation. Yes
6. After clicking Install, jump to the next page, configure the root account and administrator account, set the password for the root account, and set the password for the administrator account
-
Configure root account password
-
Configure the administrator account and password
7. Wait for the installation to load. After the installation is completed, you will be prompted to restart. Click Restart and unplug the USB flash drive. The CentOS system is installed.
8. After restarting, click to accept the license, complete the configuration, and you can log in and use it normally.