I recently purchased a logic analyzer from Zhengdian Atom, and now I am recording the usage of this logic analyzer.
A logic analyzer is less than half the size of a palm.
Install the host computer software and click Yes all the way.
Use zadig to install the ATK-Logic driver.
After installing the driver, plug the logic analyzer into the computer and the indicator light will turn green.
Now use a logic analyzer to capture the waveform protocol, and connect the TX and GND of the serial port to channel 0 and GDN of the analyzer.
Send data regularly on the serial port host computer
Grab it with the analyzer and configure the analyzer as follows
Hold down the right mouse button to enlarge the zoned graphic.
Protocol parsing configuration:
