1: Before installing software and optimizing, it is best to take a snapshot of the virtual machine to prevent mistakes and regrets.
2: First map the disk and copy the required software and tools to the virtual machine. Please refer to the previous article for the mapping method.
3: The system has not been activated after installation and needs to be activated. If the activation tool does not require the use of a network, it can be activated directly. If network activation is required, a network must be added to the virtual machine, because I did not choose to use the network when I created a new virtual machine in the first article.
4: Use the network to activate the system. First, shut down the virtual machine and edit the virtual machine settings.
5: Click Add.
6: Select the network adapter.
7: Choose the network connection method according to your actual situation. I use NAT and check Connect at startup.
8: Start the virtual machine and test the Internet access function. Remember to delete the network adapter when not in use. Download and install the patch.
9: Run the floppy disk setting master in the packaging tool and use the tool to optimize settings.
10: In the multimedia optimization settings, optimize the running speed of multimedia applications by disabling the automatic operation of CDs and USB devices. Save Settings
11: Cancellation requires restarting the resource manager.
12:: Disable all error reporting, other optimizations can be optimized according to personal preference.
13: Other optimizations, this can be optimized according to your actual situation. I probably made the following optimizations, setting desktop icons, turning off UNC, turning off the firewall, turning off Defender, turning off automatic updates, turning off hibernation in the power supply, privacy settings, etc.
14: Software installation, install according to your actual situation, apply full patches, you can use Windows offline installation package.
15: After optimizing the system and installing the software, run the soft media cleaning master in the packaging tool. Select all to start scanning.
16: Clean up junk files.
17: Privacy settings can be cleaned according to the actual situation.
18: Right-click the WIN10 tab settings, check Connected and Connect at startup in CD/DVD (SATA), and click Browse to find the ISO boot file we made.
19: Right-click the WIN10 tab and restart the client in the power supply.
20: Enter the PE system.
21: Find the corresponding version and run the packaging tool Dism++. We use Dism++x64.exe.
22::Accept.
23: Choose your own installation system interface.
24: Open session.
25: Select the system space, clean it again, select all cache files, and choose others according to the situation.
26: Cleaning completed.
27: Right-click the WIN10 tab and disconnect the CD/DVD (SATA).
28: Right-click the WIN10 tab, power cycle the client, and enter the WIN10 interface. The software and optimization cleanup has been completed, and you can take another snapshot and then package it.
