Install or reinstall Windows system

Disclaimer: technology for the benefit of mankind, is prohibited for illegal purposes, resulting in losses if other illegal purposes, and Benpian nothing to do.

Normally boot Windows10 system:

1. Power computer access (this step is very important)
2. Open cmd, input shutdown -r -o -t 1
3. After restarting choose Troubleshooting
4. Select reset this computer
5. According to the needs choose to keep personal files / delete all content
6. Wait until the installation is complete, the computer will reboot several times during a normal phenomenon
7. After completing the reconfiguration of the computer can follow the prompts

Can not boot / other normal system:

1. PE prepared dish (PE disk production method, see: making PE disk )

2. Download the Windows system installation package

3. The downloaded Windows system installation package to the PE tray

4. Power computer access (this step is very important)

5. PE disk into the computer

6. Hold down the F12 key when you start your computer, choose U disk to boot from (see Invoking Hotkey: Start Hotkey List U disk various brands of motherboards, notebooks, desktop machine )

7. Open File Manager

8. Right-click the C drive, select the format

9. Click on Start

10. After formatting find the Windows installer on your desktop and open

11. Select Windows Vista / 7/8/10/2008/2012

12. [Select] contains the Windows installation folder select just copied to the U disk in the Windows installation files

13. [Select] boot drive two cases:

    • The first green display MBR: Select C plate
    • The first green display is GPT: a selection of about 300MB disk

14. If none appears three red lights (green, yellow normal), normal instructions; If the red appears, re [Select] boot drive, until the red light does not occur, the process proceeds to the next step

15. [Position] installation disk to select the C drive

16. Select the version they need, usually selected Pro

17. Click Start Installation

18. Pop-up page select OK

19. Wait for the application Windows image file (approximately 5 minutes)

20. Tips have been completed, then pull out the U disk, click [restart]

21. Click [as] to restart after failure to restart, then click on the Start menu to restart

22. Wait until the installation is complete, the computer will reboot several times during a normal phenomenon

23. After completing the prompts to reconfigure computer

24. carry out