Method 1: Reset the network through settings
In addition to resetting the network through commands, users can also configure network settings in Win10 settings. The specific steps are as follows:
1. First, from the start menu in the lower left corner of Win10, click to open "Settings", and then enter the "Network and Internet" settings, as shown in the figure.
2. In the network setting interface, pull down the "Status" interface on the right side, and you can find the "Reinstall Network" operation, click Reinstall Network to perform the corresponding operation.
After Win10 resets the network, you need to restart the computer, which is equivalent to restoring the network to factory settings
Method 2: Use the command to reset the Win10 network
Reset network command:netsh winsock reset
1. First open the "Run" operation box as an administrator, then enter the cmd command, and then press the "Enter key" to open the command prompt window, as shown in the figure.
2. After opening the command prompt window, enter the command netsh winsock reset, and then press the Enter key (Enter) to run the command to reset the network, as shown in the figure below.
