"It's really sad. When I use the computer, it freezes no matter what I do. I haven't installed any large games, and the configuration of the computer is pretty good. Why is the computer always lagging like that?"
One of the worst experiences when using a computer is that the computer freezes, which will not only delay our work, but also affect our mood. In fact, there are various reasons for computer freezing, and we need to understand these reasons in order to better solve this problem. About how to solve the problem of computer freezing, the editor will answer you below.
Why is the computer lagging?
What is the reason why the computer configuration is very high but it is inexplicably stuck ? The editor summarizes some common causes of computer freezes, you can refer to the following reasons:
Insufficient memory : When running multiple programs or tasks, insufficient computer memory will cause the system to respond slowly and freeze;
Running too many startup items : Too many startup items will occupy system resources, causing the computer to respond slowly after booting;
Hard disk problems : Bad sectors or insufficient storage space on the hard disk will lead to slow data reading, which will cause freezes;
Overheating : Dust accumulation inside the computer or poor fan cooling will cause the CPU temperature to be too high, causing freezes and system crashes;
Software Conflict or Virus Infection : Installing incompatible software or getting a virus infection can interfere with the normal operation of the system and cause the computer to freeze.
How to solve the computer freeze problem?
When using the computer, if the computer freezes, we should promptly operate according to the following methods.
Method 1: Increase memory
What should I do if the computer freezes seriously? This may be due to the insufficient memory of the computer, we can solve it by increasing the memory, the operation is as follows:
1. Press the [Ctrl + Shift + Esc] shortcut key to enter the [ Task Manager ];
2. Under the [ Performance ] tab, check the [ Memory ] column to determine whether the memory is exhausted;
3. If the memory is insufficient, upgrade the memory stick, find the suitable memory stick specification, and insert it into the motherboard memory slot.
Method 2: Optimize startup items
Sometimes too many startup items on the computer will cause the computer to freeze. How to deal with the computer freeze ? Startup items can be optimized.
1. Right-click on the taskbar and select [Task Manager] ;
2. Switch to the [ Startup] tab to list all startup items and their impact on startup;
3. Right-click the program that does not need to be started, and select [Disable].
Method 3: Check hard disk problems
The computer was fine and suddenly changed card, it may also be due to a problem with the hard disk, you can check the hard disk, the operation is as follows:
1. Open the file explorer, right-click the hard disk, and select [ Properties ];
2. Under the [ Tools ] tab, click [ Check ] and select [ Scan Drives ];
3. Wait for the checking process to complete, and repair or backup the data on the hard disk according to the result.
Method 4: Clean the inside of the computer
What should I do if the computer freezes seriously? At this point, we can try to clean the inside of the computer, as follows:
1. Shut down and unplug the power cord, open the side panel of the computer case;
2. Use a compressed air tank or a slender soft brush to clean the internal dust;
3. Make sure the fan rotates normally, if there is any failure, replace the fan in time.
What should I do if the file is lost during the operation?
When solving the problem of computer freezing, we may delete various files, or delete some files by mistake. How to remedy the data loss? The editor has been using the software below. This professional data recovery software can effectively help us recover files. You don't need too much computer skills, and you can easily solve the problem of file loss. How does the software work? details as follows:
Operating environment:
Demonstration model: Lenovo ThinkPad E14
System version: Windows10
1. Install the software on your computer first. After entering, you can select the file types you want to scan. Usually it is more convenient to select all, and then select the disk to be scanned (only one disk can be selected at a time), and click [ Scan ] ;
2. Check the file, here you can select the file according to the type or path, or you can directly enter the name to quickly locate;
Note: the scanned result must be consistent with the file name, size and creation date of the lost data. missing files.
3. After the first selection, you can click [Restore] . If you want to get more data, click [Deep Scan] and select again and click [Restore].
We always encounter the problem of computer lag when using the computer. It doesn't matter, refer to this article, I hope it can help you solve this problem! At the same time, I also hope that everyone will develop the habit of cleaning up the memory when using the computer, so as to keep our computer running well!
Past recommendations:
https://blog.csdn.net/datarecover/article/details/131824602?spm=1001.2014.3001.5501