1. The picture is saved in the SD card, and the microcontroller reads the picture saved in the SD and displays it on the TFT display. Free SD card.
2. There are two modes, an automatic switching mode and a manual selection mode. It can be adjusted through the buttons on the circuit board or the infrared remote control.
3. In the automatic mode, the picture display is automatically switched. In manual mode, you can flexibly select the picture you want to display through the circuit board or the front and rear buttons of the infrared remote control.
3. Details:
Video explanation: Bilibili searches for the UP master "love to engage in single-chip microcomputer" and searches for the keyword " infrared remote control electronic photo album " in its space to watch the detailed explanation of the video
Function demonstration operation :
This is an infrared remote control electronic photo album based on STM32 microcontroller . Hardware composition: STM32F103RCT6 minimum system + 2.8-inch TFT display + 1 mode button + 2 picture switching keys + infrared remote control + infrared receiver + SD card (save pictures) + SD card module
1. The picture is saved in the SD card, and the microcontroller reads the picture saved in the SD and displays it on the TFT display. Free SD card.
2. There are two modes, an automatic switching mode and a manual selection mode. It can be adjusted through the buttons on the circuit board or the infrared remote control.
3. In the automatic mode, the picture display is automatically switched. In manual mode, you can flexibly select the picture you want to display through the circuit board or the front and rear buttons of the infrared remote control.
Watch the video for a detailed introduction to the specific test method. . .
To learn more, please watch the video explanation. . .
demonstration operation :