First of all, we need to unlock the BL lock permission of Mi 6 in the first step.
After unlocking, flash into the official website package first. As shown in the picture:
Be careful here. Select the first one to delete all! Select the first one to delete all! The first to delete them all!
After brushing the official bottom package, enter the system, shut down directly, and enter the FASTBOOT mode. At this time we open
Flash into Rec. After brushing in, it will automatically jump to the computer and import the virtual package. Shuangqing - brush in.
After flashing the virtual package, you must turn it on. After booting and entering the Lineage OS native system normally, the interface is very different from the Xiaomi system, and you can tell it at a
glance!
After it can be turned on, we turn it off, turn it off, press the volume up button, and enter the recovery interface, which is the twrp interface. At this time, we will add the
three supplementary packages that were flashed into the folder and send them to Xiaomi. 6 In the mobile phone, there are two ways to copy, one is to directly
send it to the mobile phone in the recovery mode interface, and the other is to slide down the status bar to find the usb connection and click on the side of the usb connection when starting up, so
that you can start In the same state, it is copied into the mobile phone, and the same process is followed by putting the video into the mobile phone. Brush the supplement into the 1.2.3 three in the folder
After the flash pack is copied in, we click Install, flash these three supplementary packs in the installation interface, first flash 1.zip and pay attention after flashing! Do not restart the system here
, return to the return icon in the lower right corner of the phone, and continue to click to enter the installation interface. Brush 2. After brushing 2, return to the same operation and continue to brush 3. Until all three supplementary packages are brushed
, restart the system
4. After brushing After restarting the system, slide down the status bar of the mobile phone to the usb option, choose file transfer as usual, send or copy the apk folder to the mi 6 mobile phone,
then swipe up to find the file management, find the apk folder you sent in, and save all the apk files Install again, 1234, return to the desktop after installation
5. At this time, we swipe up, first find edxp and click in. If everything follows the tutorial, you can see that the activation status is displayed inside. At this time,
we click the upper left corner and then click the module, and check all the options. , then go back to the desktop and swipe, find the virtual live broadcast app and click to enter, see the
activation interface, and authorize him to access the album and file permissions.
6. The last step is to activate. Enter *#06# in the place where you make a call on your mobile phone to find out the unique identification serial code of your mobile phone. There are two dual-card Mi 6s. Just copy the first serial code and send it to me for activation. The activation
here It is permanently activated offline, and can be used without networking!
7. After we send and copy the video to the mobile phone, select the video in the selection video. If the video is too large and flashes back, then wait for him to jump back and don’t move
anything. This is the literal meaning. When you encounter this In this case, operate like this. After jumping back to the selection interface, turn on the local camera, switch the scan code
interface, and switch the icon interface of the photo, you can see the display effect. If there is no effect, remember to operate it a few times. Check whether each step is
in place
8. You can manually play the video. The video folder of the mobile phone is the selected video. If there is only one video 1.MP4, it will automatically play a video in a loop. If you want to play
multiple videos in a loop, you can name the text in sequence in the video folder and Put videos in order, such as 1.MP4 2.MP4 3.MP4
, so that multiple videos can be played in a loop in order. Please test the specific supported project platforms by yourself.
Test chart:
