Unmanned live broadcast flashing package installation tutorial
Introduction: Unmanned live broadcast flash package installation tutorial (detailed operation), which introduces the steps of Douyin unmanned live broadcast flashing and detailed operation tutorial in 6 steps. The method is applicable to Douyin unmanned live broadcast and Kuaishou unmanned live broadcast
step:
- Step 1: Install flash driver
- Step 2: Open the flash program XiaoMiFlash.exe and install the Driver
- Step 3: Flash the OPPO R9S official wired flash clean package into the mobile phone to be used for live broadcasting
- Step 4: Flash the root package of OPPO R9S
- Step 5: Install the framework package Xp.zip + 3 unmanned live broadcast apk
- Step 6: Copy the unmanned live broadcast video + test the live broadcast
Step 1: Install flash driver
Run the flash driver .exe and install it in the default way (if prompted to restart the computer, just restart)
Step 2: Open the flash programXiaoMiFlash.exe, and install the Driver
Open the Xiaomi flash program, click on the upper left corner to uninstall the driver, and then click Install
After clicking Install, the following interface will pop up. Click Always install some driver software. This interface will pop up 4 times in a row, and you will choose to startfinally install some driver software
This interface will pop up 4 times in a row, and you will choose to install some driver software firstand finally.After successful installation, as shown below
Click OK, then click Close to return to the program main screen...
Step 3: Flash the OPPO R9S official wired flash clean package into the mobile phone to be used for live broadcasting
- Turn off your phone
- Press [Volume Up Key + Volume Down Key] simultaneously on the rs9 phone, and press 4 After seconds, plug the mobile phone data cable connected to the computer into the phone.
- Check whether the phone flash mode is successful
On the desktop, right-click My Computer, click Manage, and find Device Management.
If the words Qualcomm HS_USB QDLoader 9008 appear in the port, as shown in the picture below, it means that the phone has been connected to the computer normally and the flashing has been successfully started. model.
- roundingXiaoMiFlash.exe sequence main interface,
Choose the location of the flash packageC:\Flash Package_qigefx\OPPO R9S Official Line Flash Clean Package\Flash Information(My The flash package is placed on the C drive, subject to your actual location)
- ClickLoad device The following picture will appear: comX (the number of X is different for each computer) device :
6. ClickFlash again, and the normal flashing will begin.
Successful Flashing is successful and the following will be displayed:
7. After the flashing is successful, disconnect the data cable of the mobile phone and turn on the mobile phone
After the flashing is successful, it will take about20 minutes to turn on the phone for the first time. Please wait patiently.
Step 4: Flash the root package of OPPO R9S
The method of flashing the root package is the same asStep 3 of flashing the OPPO R9S official wired flash pure package.
You just need to select the location of the root package before flashing. The location of my root flash package is as follows:
C:\Flash package_qigefx\rt\oppo-r9s-7to-recovery-new
Select the root package you want to flash, click Load, and then click Flash. That’s it! !
Note: Root package flashing is very fast, it will be flashed in a few seconds.
After successfully rooting, disconnect the mobile phone data cable. Press the mobile phone volume down button + the mobile phone power button at the same time to enter
Qitu flash settings
After entering Qitu settings, click Advanced, click SuperSU Root
Slide to the farthest right, then click Restart the system
Root package, flashing is completed. And then re-enter the mobile phone system normally.
Tip: Please runSuper Sue in geek mode
Step 5: Install the framework package Xp.zip + 3 unmanned live broadcast apk
1. Copy xp.zip and (xp.apk 3.0.apk Marketing Alliance.apk) in the DY directory to the root directory of the phone
Connect the mobile phone to the computer and copy the above 4 files to the root directory of the mobile phone r9s, as shown in the figure:
2. After copying, turn off the phone and disconnect the data cable
3. Press simultaneously mobile phone volume down button + mobile phone power button to enter Qitu flash machine and perform xp.zip installation,
Select xp.zip Flash into Image, then slide to the far right,After installation, click Restart the system
4. Install xp.apk 3.0.apk Marketing Alliance.apk
After the phone restarts, install them separately in the system's file manager. As shown in the picture
- After successful installation, immediatelyinstall Douyin app, connect r9s to wifi, and then Software storeDownload and install Douyin, and runDouyin app
As shown in the picture
First open a few apks as shown above. If the xp framework appears, it will not be activated. You can re-flash the root package once. Until root is successful, as shown below: After xposed is successful, click the menu in the upper left corner, click Module, and check Marketing Alliance and colorOs3.0 will do
- Run the marketing alliance and enter the activation code corresponding to the ID for activation
Find a service provider to provide activation code
Save the activation code to your phone as a file name, and copy it in file management, editing
Paste it into the marketing alliance to activate it.
Step 6: Copy the unmanned live broadcast video + test the live broadcast
1. Place the prepared unattended live videovideo.mp4 into the designated directory on your phone: Computer\OPPO R9sk\Internal Storage device\Android\data\com.ss.android.ugc.aweme\cache\video.mp4
2. Run the Douyin app, then click on the marketing alliance, start it, and enter the unmanned live broadcast...
Reference materials for learning: www.xingxiaolm.com/wurenzhibo