soft routing
Google cloud disk download address: esir openwrt firmware- openwrt-gdq-winter[2022]-x86-64-generic-squashfs-legacy.img.gz
Link: https://pan.baidu.com/s/1dDz_PNkpYM1HgkH-oIb8AQ Extraction code: g6cq
Preparation for flashing: first prepare a U disk, a wired keyboard, and a wired mouse, followed by winpe installation and maintenance tool software (commonly used Lao Maotao, Chinese cabbage, and micro PE). One advantage is that you can directly write the winpe system maintenance tool into the U disk without first installing it into the windows system. Finally, the disk writing tool physdiskwrite is used to write the esir openwrt firmware image to the built-in hard disk of the soft router.
Link: https://pan.baidu.com/s/1fJFenW5cTd5z30KfUuuc4A?pwd=vghz Extraction code: vghz
physdiskwrite download address
Link: https://pan.baidu.com/s/1k2NKMQ-3qrVcnoXMj9bvqw?pwd=3kug Extraction code: 3kug
1. First decompress the downloaded esir firmware openwrt-gdq-winter[2022]-x86-64-generic-squashfs-legacy.img.gz, and get the suffix openwrt-gdq-winter[2022]-x86-64 The -generic-squashfs-legacy.img file can be named openwrt.img for easy memory; then copy the disk writing tool hysdiskwrite into the USB disk, which will be used later when entering the winpe system.
2. Insert the U disk with the micro-PE maintenance tool into the usb port of the soft router, and plug the wired keyboard and mouse into the other two usb ports. After powering off and restarting the soft router, keep pressing the F2 or del key on the keyboard to enter the bios Set the U disk boot item.
3. After entering the Micro PE system, open the system tool DiskGenius, and select Delete All Partitions in the toolbar. The purpose is to delete the hard disk data built into the soft router. Remember to select the corresponding partition of the soft router hard disk. After deleting all partitions, no new partition is required. Otherwise, physdiskwrite will not be able to write normally later.
4. Open the command line CMD window, enter the drive letter corresponding to the U disk, if it corresponds to u, enter u: and press Enter directly.
5. After entering the path of the u disk, you can use the physdiskwrite tool command, directly enter physdiskwrite -u openwrt.img and press Enter. If the soft router has only one built-in hard disk, just input 0 (zero) directly, and then you will be prompted to enter the letter Y and press Enter directly.
6. The next step is to wait for the end of writing to the disk, and then you can pull out the U disk to restart the soft router.
7. After restarting, wait for the firmware to be installed automatically. The esir firmware installation process will not have a marquee effect, so wait until it appears as shown in the figure below and press Enter to start it.
8. Finally, use a network cable to plug into the LAN port of the soft router, and the computer network card settings will be automatically obtained. Enter the default address of 192.168.5.1 in the browser to enter the management background of esir.
The esir firmware is very stable to use, and it also integrates the game acceleration plug-in uu accelerator, which is undoubtedly very convenient for friends who like to play games online. Basically, all the services that should be available are available. The following is the esir high-level firmware Screenshot of integrated services.