It is recorded here that when using xshell to connect to the VMware virtual machine operating system linux, the connection failure of xshell is often caused by changing the network environment. When the virtual machine creates a new operating system, the network adapter selects NAT mode (N): used to share the host IP address. At this time, the virtual machine where the operating system is located
The ip address is on the same network segment as vmnet8, not on the same network segment as your wireless network card! If your NAT virtual network card vmnet8, the ip address is 192.168.160.1, it needs to be set to 192.168.160.3, the mask is 255.255.255.0, and the gateway is 192.168.160.2. At the same time, ensure that the VMware NAT service and VMware DHCP service are started normally and then change the settings. In the advanced sharing settings, public network, open file and printer sharing (this is related to the system firewall settings)!