Dear users and friends of win10, I believe that you have encountered the problem of error 676 when connecting to broadband? So what should I do if the broadband error 676 occurs in Win10? Next, the editor of Superman Software will introduce the broadband error 676 to everyone What to do, I hope you like it.
What should I do if the broadband error 676 occurs in Windows 10?
Reason analysis:
1. The computer network card address is inconsistent.
2. There is a user attack masquerading as a gateway under the ISP.
Disposal method:
1. The PPPOE dial-up protocol that comes with the system is being used. It is necessary to disconnect the PPPOE link being connected or restart the computer.
2. If the client is offline abnormally, this prompt will appear when dialing again. It is recommended to turn off the MODEM for 5 minutes before turning it on. After the system automatically releases the user account, you can log in normally.
3. Correct the physical address of the network card.
If the shortcomings are still not solved after the above methods, then consider the reason for the physical address of the network card. Usually, the address pool is full or the physical address of your network card is stolen. Most of the users who have error 676 have the reasons for this. It is caused by the physical address of the network card, so this method is the most effective solution for most errors 676.
(1) Right-click the "My Computer" icon, select "Manage", select "Device Manager" in the left column of the pop-up window, then double-click "Network Adapter" in the right column, and select the currently used network card .
(2) Right-click to open the "Properties" of the network card, select the "Advanced" tab, and select "Network Address".
(3) Click "Value" on the right, and fill in the new physical address of the network card (different from the original physical address) - a 12-digit hexadecimal number (as long as the new address you set does not happen to be the same as someone else's) There will be no problem.)
(4) The physical address can be viewed by running the cmd command and executing ipconfig/all.
The above is the reason and solution for the Win10 broadband connection prompt error 676. After the operation is completed, the problem should be solved. If there are still untreated users, you may need to contact the broadband customer service to stop the solution.
Reference; http://www.crxz.com/softdoc/pc/74961.html