After the schematic design is completed, you can use the built-in tools to check.
First of all, it can be visually observed that there should be no brown wavy lines in the schematic diagram.
3.1 Compile the project
Then according to the lower right corner, system->message
If there is an error, it must be handled. Out of a rigorous attitude, try to deal with warnings as much as possible.
3.2 List of Devices
Different packages of devices have different parameters. When designing circuits, the influence of various packages on circuit performance must be considered. Therefore, it is recommended that the packages of all devices should be determined when drawing the schematic diagram, and the available products should be sorted out. list.
Check whether the parameters and packages of the devices are correct one by one
If you want to modify the parameters of the device, you can double-click the device on the schematic diagram to modify it. It is not recommended to modify the BOM after exporting the BOM, because if a version update is required, the correct BOM can be exported from the schematic, which is more convenient than manually modifying the BOM.
Batch quick modifications can also be made using the Package Manager tool.
3.3 Separate network
There is a REP file under the project file, double-click to view a separate network. If there is a separate network, it needs to be modified.
