Selected content of the home directory root folder of the ftp server
change
If the DDK and Atlas 200 DK Atlas 300 are not on the same server, go to 1 to 7. If the DDK and Atlas 200 DK Atlas 300 are on the same server, run 7 directly as the root user in the "project directory/run/out" directory. mkdir classify_netscp -rDDK installation directory /projects/classify_net/run
If the DDK and Atlas 200 DK Atlas 300 are not on the same server, go to 1 to 7. If the DDK and Atlas 200 DK Atlas 300 are on the same server, run 7 directly as the root user in the "project directory/run/out" directory. mkdir detection_ssdscp -rDDK installation directory/projects/detection_ssd/r
Contents of the home directory root folder of the ftp server
This chapter takes a simple AI application based on classification network as an example, and takes you to experience the general process of application development through the command line. In this example, a picture in yuv format is input, and the resnet18 classification network performs inference calculation to obtain the classification result of the picture. Please refer to the following for the specific implementation process. mkdirDDK installation directory/projectsmkdir DDK installation directory/projects/Custom_Enginecp
When adding a node, the message "Add node failed, node already exists" is displayed. System performance analysis has been installed on the server to which the node is to be added or a node has been added. If the system performance analysis is installed on the server to be added, you need to log in to the server to uninstall the system performance analysis. For details, see the chapter "Installation > Uninstallation". After the uninstallation is successful, add the node again. Before uninstalling, please confirm that the system performance analysis installed on the server is not in use. If the tool uninstallation fails, you need to manually delete "/home/mallu
Home directory root folder of the ftp server More content
When adding a node, the message "Add node failed, node already exists" is displayed. System performance analysis has been installed on the server to which the node is to be added or a node has been added. If the system performance analysis is installed on the server to which the node is to be added, you need to log in to the server to uninstall the system performance analysis. For details, see Uninstallation. After the uninstallation is successful, add the node again. Before uninstalling, please confirm that the system performance analysis installed on the server is not in use. If the tool uninstallation fails, you need to manually delete "/home/malluma/mallum
When adding a node, the message "Add node failed, node already exists" is displayed. Diagnostic debugging has been installed on the server to which the node is to be added or a node has been added. If diagnostic debugging has been installed on the server to which the node is to be added, you need to log in to the server to uninstall the diagnostic debugging. For detailed steps, see Uninstalling. After successful uninstallation, add the node again. Before uninstalling, please confirm that the diagnostic debugging installed on the server is not in use. If the tool uninstallation fails, you need to manually delete "/home/malluma/malluma_conf/m
If the DDK and Atlas 200 DK Atlas 300 are not on the same server, go to 1 to 7. If the DDK and Atlas 200 DK Atlas 300 are on the same server, run 7 directly as the root user in the "project directory/run/out" directory. mkdir fasterrcnn_vgg16scp -rDDK installation directory/projects/fasterrcnn_v
After the version upgrade, the node management page displays the node status as version mismatch. Incorrect node server authentication information is entered during the upgrade process, resulting in the node upgrade failure. Execute the upgrade script on the web server for version mismatched nodes. Run the following command to enter the tool installation directory ("/opt/hyper_tuner" is the tool installation directory, please replace it according to the actual situation). cd /opt/hyper_tuner Execute the following command to upgrade the nodes whose versions do not match. bash
After the version upgrade, the node management page displays the node status as version mismatch. Incorrect node server authentication information is entered during the upgrade process, resulting in the node upgrade failure. Execute the upgrade script on the web server for version mismatched nodes. Run the following command to enter the tool installation directory ("/opt/hyper_tuner" is the tool installation directory, please replace it according to the actual situation). cd /opt/hyper_tuner Execute the following command to upgrade the nodes whose versions do not match. bash
After the version is upgraded, the node management page displays the node status as version mismatch, as shown in Figure 1. Incorrect node server authentication information is entered during the upgrade process, resulting in the node upgrade failure. Execute the upgrade script on the web server for version mismatched nodes. Run the following command to enter the tool installation directory ("/opt/tuning_kit" is the tool installation directory, please replace it according to the actual situation). cd /opt/tuning_kit Run the following command to upgrade nodes with mismatched versions. b
Select "Project" on IntelliJ, find the ".idea" folder, right-click and select "New > File", enter the file name "settings.json" to generate the settings.json file. As shown in Figure 1. Copy the following code to the newly created settings.json file, modify the server name, the IP of the target server, the port corresponding to the IP of the target server, the user name of the login target server and the synchronization code in the following code to
Download the HAProxy source code in your local browser. Download address: https://www.haproxy.org/download/1.9/src/haproxy-1.9.0.tar.gz Download address: https://www.haproxy.org/download/1.9/src/haproxy-1.9 .0.tar.gz Copy the source code to the server /home directory. if service
Download address: https://varnish-cache.org/_downloads/varnish-6.2.0.tgz If the server can access the network, you can use the wget command to download the source code directly on the server. --prefix=PATH: Specifies the installation directory of Varnish.
When adding a node, the message "Add node failed, node already exists" is displayed. System performance analysis has been installed on the server to which the node is to be added or a node has been added. If the system performance analysis is installed on the server to which the node is to be added, you need to log in to the server to uninstall the system performance analysis. For details, see Uninstallation. After the uninstallation is successful, add the node again. Before uninstalling, please confirm that the system performance analysis installed on the server is not in use. If the tool uninstallation fails, you need to manually delete "/home/malluma/mallum
Download the Lighttpd source code in your local browser. Download address: https://download.lighttpd.net/lighttpd/releases-1.4.x/lighttpd-1.4.53.tar.gz Download address: https://download.lighttpd.net/lighttpd/releases-1.4.x /lighttpd-1.