Win10 installation vmware workstation cannot use the bridge mode to solve the process
Win10 installation vmware workstation cannot use the bridge mode to solve the process
Question: It is good to use the vmware workstation bridge mode under win8, but it can't be used after upgrading to win10.
After installing vmware workstation 12 in win10 system, it is found that there is no bridge network card in the network connection.
Selecting the bridge mode before turning on the virtual machine will also prompt "Cannot change the network to the bridge state: there is no unbridged host network adapter".
The bridge network card driver of VMnet0 is indeed not found in the device manager.
Without the bridging mode, the virtual machine cannot be in the real same segment of the network as the host machine.
Result process:
I personally test
According to the online instructions, the problem should be solved now, but in fact, the vm on my win10 still cannot use the bridge mode.
One additional step:
Select Edit—"Virtual Network Editor—"Change Settings—"Look at the picture below, and change it automatically as shown in the picture.
Verify: You can log in to the virtual machine 192.168.1.100 with putty on the physical machine, and you can also access the Internet on the virtual machine.
Get it done!
Win10 installation vmware workstation cannot use the bridge mode to solve the process
Question: It is good to use the vmware workstation bridge mode under win8, but it can't be used after upgrading to win10.
After installing vmware workstation 12 in win10 system, it is found that there is no bridge network card in the network connection.
Selecting the bridge mode before turning on the virtual machine will also prompt "Cannot change the network to the bridge state: there is no unbridged host network adapter".
The bridge network card driver of VMnet0 is indeed not found in the device manager.
Without the bridging mode, the virtual machine cannot be in the real same segment of the network as the host machine.
Result process:
I personally test
According to the online instructions, the problem should be solved now, but in fact, the vm on my win10 still cannot use the bridge mode.
One additional step:
Select Edit—"Virtual Network Editor—"Change Settings—"Look at the picture below, and change it automatically as shown in the picture.
Verify: You can log in to the virtual machine 192.168.1.100 with putty on the physical machine, and you can also access the Internet on the virtual machine.
Get it done!