PS shortcut
File operations
Create a new graphic file [Ctrl]+[N]
Create a new file with default settings [Ctrl]+[Alt]+[N] to
open an existing image [Ctrl]+[O] to
open as... [Ctrl]+[Alt]+ [O]
Close the current image [Ctrl] + [W]
Save the current image [Ctrl] + [S]
Save as... [Ctrl] + [Shift] + [S] Save a
copy [Ctrl] + [Alt] + [S]
Page setup [Ctrl]+[Shift]+[P]
Print[Ctrl]+[P]
Open the "Preferences" dialog [Ctrl]+[K]
Display the last displayed "Preset" dialog [Alt]+ [Ctrl] + [K]
Set the "General" option (in the preset dialog box) [Ctrl] + [1]
Set the "Save file" (in the preset dialog box) [Ctrl] + [2]
Set the "Display And cursor" (in the preset dialog box) [Ctrl] + [3] to
set the "transparent area and color gamut" (in the preset dialog box) [Ctrl] + [4] to
set the "unit and ruler" (in the preset dialog box) In the dialog box) 【Ctrl】+【5】
Set the "reference line and grid" (in the preset dialog box) 【Ctrl】+【6】
outer glow effect (in the "effect" dialog box) 【Ctrl】 +【3】
Internal luminous effect (in the "Effect" dialog box) 【Ctrl】+【4】
Bevel and relief effect (in the "Effect" dialog box) 【Ctrl】+【5】
Apply the currently selected effect and make Adjustable parameters (in the "Effect" dialog box) 【A】
Layer blending mode
Cycle selection of blending mode [Alt]+[-] or [+]
normal [Ctrl]+[Alt]+[N]
threshold (bitmap mode) [Ctrl]+[Alt]+[L]
Dissolve[Ctrl]+[ Alt]+[I]
Behind [Ctrl]+[Alt]+[Q]
Clear [Ctrl]+[Alt]+[R]
Multiply [Ctrl]+[Alt]+[M]
Screen[Ctrl]+[ Alt]+[S]
Overlay [Ctrl]+[Alt]+[O]
Soft light[Ctrl]+[Alt]+[F]
Bright light[Ctrl]+[Alt]+[H]
Color lightening[Ctrl] +[Alt]+[D]
darken the color[Ctrl]+[Alt]+[B]
darken[Ctrl]+[Alt]+[K]
brighten[Ctrl]+[Alt]+[G]
difference[ Ctrl]+[Alt]+[E]
Exclude[Ctrl]+[Alt]+[X]
Hue[Ctrl]+[Alt]+[U]
Saturation[Ctrl]+[Alt]+[T]
Color[Ctrl ]+[Alt]+[C]
Luminosity[Ctrl]+[Alt]+[Y]
Decoloring Sponge Tool+[Ctrl]+[Alt]+[J]
Adding Color Sponge Tool+[Ctrl]+[Alt 】+【A】
Darkening/Darkening tool+【Ctrl】+【Alt】+【W】
Midtone Dodge/Burn Tool+[Ctrl]+[Alt]+[ V] Highlight Dodge/Burn Tool+[Ctrl]+[Alt]+[Z]
Select function
Select all【Ctrl】+【A】
deselect【Ctrl】+【D】
reselect【Ctrl】+【Shift】+【D】
feather selection【Ctrl】+【Alt】+【D】
reverse selection【Ctrl】 +[Shift]+[I]
Path selection area [Enter] on the numeric keyboard to
load the selection [Ctrl]+click the thumbnail in the layer, path, and channel panel
Filter
Press the last parameter to do the last filter again [Ctrl] + [F] to
withdraw the effect of the last filter [Ctrl] + [Shift] + [F] to
repeat the last filter (can be Adjust parameters) [Ctrl]+[Alt]+[F]
selection tool (in the "3D change" filter) [V]
Cube tool (in the "3D change" filter) [M]
Sphere tool (in the "3D change" filter) "Change" filter) [N]
Cylinder tool (in the "3D change" filter) [C]
Trackball (in the "3D change" filter) [R]
Panoramic camera tool (in the "3D change" filter In the mirror) 【E】
View operation
Display color channel [Ctrl] + [~]
Display monochrome channel [Ctrl] + [Number]
Display composite channel [~]
Preview in CMYK mode (switch) [Ctrl] + [Y]
Turn on/off color gamut warning [Ctrl] +[Shift]+[Y]
Zoom in view [Ctrl]+[+]
Zoom out view [Ctrl]+[-]
Full canvas display [Ctrl]+[0]
Actual pixel display [Ctrl]+[Alt]+[0 ]
Scroll up one screen [PageUp]
Scroll down one screen [PageDown]
Scroll left one screen [Ctrl] + [PageUp]
Scroll right one screen [Ctrl] + [PageDown]
Scroll up 10 units [Shift]+[PageUp]
Scroll down 10 units [Shift]+[PageDown]
Scroll left 10 units [Shift]+[Ctrl]+[PageUp]
Scroll right 10 units [Shift]+ [Ctrl]+[PageDown]
Move the view to the upper left corner [Home]
Move the view to the lower right corner [End]
Show/hide selection area [Ctrl]+[H]
Show/hide path [Ctrl]+[Shift]+[ H]
Show/hide ruler [Ctrl] + [R]
Show/hide reference line [Ctrl] + [;]
Show/hide grid [Ctrl] + ["]
Snap to the reference line [Ctrl] + [Shift] + [;]
Lock the reference line [Ctrl] + [Alt] + [;]
Snap to the grid [Ctrl] + [Shift] + ["]
Show/hide the "brush" Panel [F5]
Show/hide "Color" panel [F6]
Show/hide "Layer" panel [F7]
Show/hide "Information" panel [F8]
Show/hide "Action" panel [F9]
Show/hide all commands Panel【TAB】
Display or hide all palettes except the toolbox【Shift】+【TAB】
Word processing
(In the "Text Tool" dialog box)
Left-align or top-align [Ctrl]+[Shift]+[L]
Middle-align[Ctrl]+[Shift]+[C]
Right-align or bottom-align[Ctrl]+[Shift] 】+【R】
Select 1 character from left/right【Shift】+【←】/【→】
Select 1 line up/down【Shift】+【↑】/【↓】
Select all characters【Ctrl】+【A】
Select the character from the insertion point to the mouse click point [Shift] plus click to
move 1 character left/right [←]/[→]
move up/down 1 line [↑]/[↓]
move left/right 1 word [Ctrl]+[←]/[→]
Decrease the text size of the selected text by 2 pixels [Ctrl]+[Shift]+[<]
Increase the text size of the selected text by 2 pixels [Ctrl 】+【Shift】+【>】
Decrease the text size of the selected text by 10 pixels [Ctrl]+【Alt】+【Shift】+【<】
Increase the text size of the selected text by 10 pixels [Ctrl]+[Alt]+[Shift]+[>]
Decrease the line spacing by 2 pixels [Alt] + [↓]
Increase the line spacing by 2 pixels [Alt] + [↑]
Decrease the baseline shift 2 pixels【Shift】+【Alt】+【↓】
Increase baseline shift by 2 pixels【Shift】+【Alt】+【↑】
Decrease kerning fine adjustment or kerning adjustment by 20/1000ems 【Alt】 +【←】
Increase kerning fine adjustment or kerning adjustment by 20/1000ems 【Alt】+【→】
Decrease kerning or kerning by 100/1000ems [Ctrl]+[Alt]+[←] and
increase kerning or kerning by 100/1000ems [Ctrl]+[Alt]+[→]
Set "Increase" "Effect Tool and Temporary Storage Disk" (in the preset dialog box) [Ctrl]+[7]
Set the "memory and image cache" (in the preset dialog box) [Ctrl]+[8]
Edit operation
Undo/Redo the previous operation [Ctrl]+[Z]
Undo the operation more than two steps [Ctrl]+[Alt]+[Z]
Redo the operation more than two steps [Ctrl]+[Shift]+[Z]
Cut selection [Ctrl]+[X] or [F2]
copy the selected image or path [Ctrl]+[C]
merge copy[Ctrl]+[Shift]+[C]
paste the contents of the clipboard to the current graphic Press [Ctrl]+[V] or [F4]
to paste the contents of the clipboard into the selection box [Ctrl]+[Shift]+[V]
Free transformation [Ctrl]+[T]
Apply free transformation (in free transformation mode (Down) [Enter]
Transform from the center or symmetrical point (in free transform mode) [Alt]
Restrict (in free transform mode) [Shift]
Distort (in free transform mode) [Ctrl]
Cancel deformation (in free transform mode) Mode) [Esc]
Freely transform the copied pixel data [Ctrl]+[Shift]+[T]
Transform the copied pixel data again and create a copy [Ctrl]+[Shift]+[Alt]+[T]
Delete the pattern in the selection box or the selected path [DEL]
Fill the selected area or the entire layer with the background color [Ctrl] + [BackSpace] or [Ctrl] + [Del]
Fill the selected area or the entire layer with the foreground color [Alt]+[BackSpace] or [Alt]+[Del] The
"Fill" dialog box pops up [Shift]+[BackSpace]
Fill 【Alt】+【Ctrl】+【Backspace】 from the history
Image adjustment
Adjust the color level [Ctrl] + [L]
automatically adjust the color level [Ctrl] + [Shift] + [L] to
open the curve adjustment dialog box [Ctrl] + [M]
to add a new point on the curve of the selected channel (' In the “Curve” dialog box) in the image, click [Ctrl] and click to
add new points to all curves except the compound curve (in the “Curve” dialog box) [Ctrl]+[Shift]
Add tap
Move the selected point (in the'Curve' dialog box) [↑]/[↓]/[←]/[→]
in an increment of 10 points to move the selected point in an increment of 10 points (in the'Curve' dialog box) 【 Shift]+[Arrow]
select multiple control points (in the "Curve" dialog box) [Shift] and press to
move the control point forward (in the "Curve" dialog box) [Ctrl]+[Tab]
move the control point back ('Curve) 'In the dialog box) [Ctrl]+[Shift]+[Tab] to
add a new point (in the'Curve' dialog box) Click the grid to
delete a point (in the'Curve' dialog box) [Ctrl] Add a point and click to
cancel the selection All points on the selected channel (in the "Curve" dialog box) [Ctrl] + [D] to
make the curve grid finer or coarser (in the "Curve" dialog box) [Alt] Add a point and press the grid to
select the color channel ( In the'Curve' dialog box) [Ctrl]+[~] to
select the monochrome channel (in the'Curve' dialog box) [Ctrl]+[number] to
open the "Color Balance" dialog box [Ctrl]+[B] to
open the "Hue" /Saturation" dialog box [Ctrl]+[U]
Full image adjustment (in the hue/saturation" dialog box) [Ctrl]+[~]
only adjust red (in the hue/saturation" dialog box) [Ctrl 】+【1】
Only adjust yellow (in the Hue/Saturation" dialog box) 【Ctrl】+【2】
Only adjust green (in the Hue/Saturation" dialog box) 【Ctrl】+【3】
Only adjust cyan (In the Hue/Saturation" dialog box) [Ctrl]+[4]
Only adjust blue (in the Hue/Saturation" dialog box) [Ctrl]+[5]
Only adjust magenta (in the Hue/Saturation" dialog box) [Ctrl]+[6]
Decolorization[Ctrl]+[Shift]+[U]
Inverted[Ctrl]+[I]
Layer operation
Create a new layer from the dialog box [Ctrl]+[Shift]+[N]
Create a new layer with default options [Ctrl]+[Alt]+[Shift]+[N]
Create a layer by copying[Ctrl] 】+【J】
Create a layer by cutting【Ctrl】+【Shift】+【J】
group with the previous layer【Ctrl】+【G】
cancel group【Ctrl】+【Shift】+【G】
direction Down merge or merge connected layers [Ctrl] + [E]
merge visible layers [Ctrl] + [Shift] + [E]
stamp or stamp connected layers [Ctrl] + [Alt] + [E]
stamp Visible layer [Ctrl]+[Alt]+[Shift]+[E]
Move the current layer down one layer [Ctrl]+[[]
Move the current layer up one layer [Ctrl]+[]]
Move the current layer Go to the bottom [Ctrl] + [Shift] + [[] to
move the current layer to the top [Ctrl] + [Shift] + []] to
activate the next layer [Alt] + [[] to
activate the previous layer [ Alt]+[]]
Activate the bottom layer [Shift]+[Alt]+[[]
Activate the top layer [Shift]+[Alt]+[]]
Adjust the transparency of the current layer (the current tool has no digital parameter , Such as moving tool) [0] to [9]
Keep the transparent area of the current layer (switch) [/]
Projection effect (in the "Effect" dialog box) [Ctrl] + [1]
Inner shadow effect (in the" effect ”In the dialog box) 【Ctrl】+【2】