table of Contents
1.1. What is vSphere Hypervisor?
2.1. Open the file after ultraiso installation is complete
2.2. Choose our downloaded virtualization software ios
2.4. Write the hard disk image, select the inserted U disk as the drive
Three, Vmware vSphere hypervisor installation
Fourth, the creation of virtual machines
4.1. Operating system image upload
4.2. Creation of virtual machine
Five, CentOS7 installation and configuration
I. Overview
There are currently four mainstream virtualization software in the market, Vmware vSphere hypervisor, Hyper-V, XEN, and KVM. The one we chose is Vmware vSphere hypervisor, the official website .
1.1. What is vSphere Hypervisor?
vSphere Hypervisor is a bare-metal hypervisor that virtualizes servers , supports integrated applications, and saves time and costs for managing IT infrastructure. Our free vSphere Hypervisor is built on the world's smallest and most reliable architecture: VMware vSphere ESXi, which sets the industry standard for reliability, performance and support.
Two, U disk boot production
| software | address |
| ultraiso | https://cn.ultraiso.net/xiazai.html |
| Vmware vSphere hypervisor |
https://my.vmware.com/cn/web/vmware/evalcenter?p=free-esxi6 |
2.1. Open the file after ultraiso installation is complete
2.2. Choose our downloaded virtualization software ios
2.3. Write image file
2.4. Write the hard disk image, select the inserted U disk as the drive
Three, Vmware vSphere hypervisor installation
(1) F11 enters the BIOS setup interface. Since you forgot to take a photo in the computer room, you can directly select the second option after entering the F11 interface to boot.
(2) After entering the setting, select the startup item as U disk startup
(3) After the U start setting is successful, restart the machine. If this screen appears, it means that the Bios setting is successful, press Enter to confirm, load the installation file and wait for installation
(4) The following is a fool-type installation and choose to continue.
(5) Software license agreement, F11 accept
(6) Select the hard disk to be installed
(7) Set the administrator password, and then need to use this password to configure the environment
(8) F11 can be installed and the installation starts successfully
(9) After F2 enters the administrator password, enter the setting interface
(10) The first option is to modify the password, what we need to do is to modify the static ip, enter the third option
(11) Select the second one to set static ip, set it to the required ip address, select by up and down keys, and select by space bar
(12) Select Y to save
(13) Client test connection test, enter the set static IP to connect
Fourth, the creation of virtual machines
4.1. Operating system image upload
(1) Select data browsing
(2) Upload, that is, upload the operating system image to the hard disk
(3) Choose the image file you want to install
4.2. Creation of virtual machine
(1) Select the host and choose to create a virtual machine
(2) My choice is to create a new virtual machine
(3) Name the virtual machine, select the version of the virtualization software, operating system and version
(4) Select storage
(5) Number of CPU cores, memory size, hard disk (thick provisioning is selected)
(6) Customize settings, select the image just uploaded
(7) Select the image file to be installed
(8) After finishing, turn on the power and it will be OK
Five, CentOS7 installation and configuration
(1) Choose the first
(2) English is selected
(3) Time zone setting, Asia-Shanghai
(4) Select the installation location and divide the disk.
(5) Select the disk, select i wil configure partitioning (I will configure partitioning), and then click done. I stolen the image and forgot to take the screenshot
(6) Then use the same method to allocate space to the other three areas and click Done
(7) Then the summary information will pop up, click AcceptChanges (accept changes)
(8) Finally choose Begin Installation
(9) Configure the network
[root@hdp101 ~]# cat /etc/sysconfig/network-scripts/ifcfg-ens192
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=static
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=ens192
UUID=1ff00507-55f3-41ef-9f97-9c734df3c3bb
DEVICE=ens192
ONBOOT=yes
IPADDR=192.168.2.230
GATEWAY=192.168.2.254
(10) Use XShell equivalent tools to connect, perfect
