Raspberry Pi 4 Model B (4G RAM) WIndows 10 installation (SD mount USB drive)

Raspberry Pi 4 Model B (4G RAM) WIndows 10 installation (SD mount USB driver Crack win10 1GRAM limitation）

As of September 1, 2020, the first complete tutorial on Raspberry Pi 4B that can use the SD card to be connected to the USB drive (that is, you can use the USB port with a mouse, keyboard and wired network card)! ! Do not reprint! !

• Step 1: Download the arm64 version image

• Link: http://uupdump.ml

• 1.1 Search version 19041.330, select arm64,The wired network card is only valid in 19041.x

• 1.2 After selecting the version, download the windows 10 version

  • The current test win10 home/home Chinese version is stable, other versions are unknown

• Download the compressed package as shown

• 1.3 Run uup_download_windows.cmd as an administrator

The following situations will occur in this laboratory. The current solution is only for students who have a wired network cable
This is a problem with the DNS of broadband operators

solution:

• 1.3.1 Change DNS to 8.8.8.8, then run the following command from the command line to refresh DNS

ipconfig /flushdns

• 1.3.2 Modify the aria2_download_windows.cmd script file in the folder, search for "%aria2%" and add –check-certificate=false after the second position, which means to modify the lower 81 lines of the file to:

"%aria2%" --check-certificate=false --no-conf --log-level=info --log="aria2_download.log" -x16 -s16 -j5 -c -R -d"%destDir%" -i"%aria2Script%"

• 1.4 Normal download situation

• 1.5 Wait for the download and IOS conversion to complete (the folder is as shown in the figure below, there are two cases)

1.5.1 ISO file version
1.5.2 WIN file version

• Directory: 19041.330_arm64_zh-cn_corecountryspecific_9abfc519_convert\ISOFOLDER\sources under the folderinstall.wimfile

• Step 2: Download the Wor installer

  • As of the latest version 2.0.0 of 2020.9.15, it may not be accessible, please prepare your own ladder

https://www.worproject.ml

• 2.1 As shown below after opening

• 2.2 ! ! Look carefully at your SD card, don't choose the wrong one! !

-ps大家手中的树莓派4B一定要加散热，否则不仅烫嘴而且巨卡，巨巨卡

• 2.3 The next step is to unzip or mount the iso generated from uup

• 2.4 Next select the driver package on the network

• 2.5 Next choose to use local uEfi firmware

UEFI固件请找我本人或在本实验室BD网盘中下载 本教程不提供下载

• 2.6 Next, select MBR for the partition table, nothing else

• 2.7 Next step, a long wait. . .

• 2.8 Finished!!!

• The third step: start, oobe

本教程的驱动及UEFI固件均为ｐｉ４的，所以无需更改引导方式及倍频，想实验的可以尝试超频，国外大佬有成功的案例

• 3.1 Enter the device manager

• 3.2 Enter Raspberry Pi Configuration

• 3.3 Pick the first one

• 3. 4 full frequency

• 35 Save and restart

Step 4: Windows boot

这部分感觉有手就行。。。。。。。。。。。 不做演示

pay attention:

During the boot process, you will be prompted to connect to the Internet. The IP and DNS of this laboratory are not DHCP and need to be configured manually. Therefore, the Internet cable cannot be used directly. It is recommended to connect a network cable from the router (the connected network is DHCP), as shown , Orange

Waiting for the end of Tianya if neighboring sea memory confidant, finish life~~

• Finally: personal advice:

  • 1. The first thing to get the Raspberry Pi is to install the heat dissipation (the heat sink and the fan find the pin diagram of GIPIO by yourself, it is said that P19 can control the speed)

  • 
    

  • 2. Be sure to ensure power supply! (There is a matching 5V 2A charger, mini VGA cable in the cabinet of laboratory 4B 先到先得哈哈哈哈)

  • Suggestion: Do not connect external mobile hard disks, HDMI to VGA converters, and messy things. Insufficient power supply will cause lag

Finally, let’s have some dry goods benefits~~~

1. As long as the operating system released worldwide, you can find it at the following URL

http://rpios.top/

2. Share a post of a foreign god, dry goods are all in the comment area

https://discourse.pi64.win/t/how-to-installing-windows-10-arm64-17134-on-your-raspberry-pi-3-and-4/488/21

Currently unresolved issues:

1. Unable to activate genuine Windows 10 (minor problem)
2. Unable to use WiFi (at the same time unable to recognize the wireless network card)
3. Unable to use the sound card
4. GPU performance is not full (some animation playback will be stuck) The above problem is being solved , I hope that the partners in the laboratory will finish the work at hand (for example: Dian game) before starting to toss the Raspberry Pi.
关于树莓派的官方系统我已实现SSH远程登陆及Mstsc远程登陆,实现了远程文件传输及远程设备状态监控，配置好了Python编译环境，感兴趣的话随时找我。

to sum up:

The installation process part of the entire tutorial is to refer to the posts and forums of various great gods at home and abroad, plus a little bit of my modification and solutions to various problems that occurred during the installation process. It took a week to finally produce win10 arm with 3G running memory and SD card to boot the USB drive. After the Raspberry Pi runs smoothly, you can watch 720P videos and small games (Plants VS Zombies). So far, I have not found any specific posts. The introduction of the installation process, so please don’t reprint it (part of the content related to windows is not compliant), I am quite familiar, and there are errors or problems in the tutorial, please understand, and if you have suggestions or more NB operations, please chat with me privately.