The source of the question bank: the safety production simulation exam one-touch public account applet
Forklift driver simulation test test questions, which are prepared by the public number safety production simulation test, combined with the national examination outline and the national examination question bank. Forklift driver simulation test test questions random test simulation test training. System answer. Forklift driver simulation test questions, click on the forklift driver mobile phone synchronous practice on the public number safety production simulation test pass. Forklift driver test questions have been updated to the latest question bank! The forklift driver simulation test can help you quickly pass the 2020 forklift driver test.
1. [Judgment question] In addition to using single-row sleeve roller chains on small-tonnage forklifts, chip chains are more widely used on forklifts. () (√)
2. [Judgment question] Before the operation of the battery car, the lighting system should be checked and it should be displayed well. If it is used during the day, it is not necessary. (×)
3. [Judgment question] When the vehicle enters a flammable and explosive place to operate, the exhaust pipe of the vehicle must be equipped with a spark extinguisher to prevent sparks from causing a fire. (√)
4. [Judgment question] The driver's visual judgment is related to the vehicle performance while the vehicle is running. (×)
5. [Judgment] The battery vehicle can be divided into mechanical transmission, hydraulic mechanical transmission and static pressure transmission according to the transmission type. (×)
6. [Judgment] The "Special Motor Vehicle Safety Technical Supervision Regulations in the Field (Factory)" stipulate that the internal combustion forklift should be equipped with a device that can prevent the engine from starting when the transmission device is in the combined state. (√)
7. [Judgment question] Welding of the fuel tank, we must first wash away the oil in the fuel tank with water to repair the weld (×)
8. [Judgment question] When driving a motor vehicle, if it finds that the direction and braking are abnormal or malfunctions, it should immediately stop working for maintenance. (√)
9. [Judgment] The friction torque of the clutch must be greater than the maximum torque of the engine (motor), so the clutch will not slip during the coupling process. (×)
10. [Judgment question] The special motor vehicles in the field (factory) refer to the special motor vehicles including road traffic and agricultural vehicles, which are only used in specific areas of the factory, tourist areas, playgrounds, etc. () (×)
11. [Judgment] Under the lifting parts and hanging objects of the forklift, it is strictly forbidden for people to stand and pass. (√)
12. [Judgment question] The brand of domestic gasoline is numbered according to octane number. (√)
13. [Judgment] The use of unsafe devices and facilities by the driver of the parking lot is an indirect cause of the accident. () (×)
14. [Judgment] The main cause of a car accident is an event that plays a major role in the consequences of the accident, or an event that makes the accident irreversible. () (√)
15. [Judgment question] The frequent and continuous work of the field car will easily cause its performance to decline and make it in an unsafe state. () (√)
16. [Judgment question] You can use the specific gravity of the battery electrolyte to judge the charge level of the battery. (√)
17. [Judgment] Drinking alcohol has a great influence on the driver's driving. Drivers who drink and drive are prone to traffic accidents. (√)
18. [Judgment question] After the horizontal and straight tie rods are broken, tailor welding is allowed. (×)
19. [Judgment question] The self-locking device in the gearbox shift control mechanism is to ensure that the transmission cannot engage two gears at the same time. (×)
20. [Judgment] When the engine is hot and lacks water, stop and add water immediately. (×)
21. [Judgment question] The special motor vehicle in the field (factory) does not need to sound the number to start. (×)
22. [Judgment] The flywheel is the driven part of the clutch. () (×)
23. [Judgment] The warning sign is a sign to warn vehicles and pedestrians to pay attention to dangerous places. (√)
24. [Judgment] The engine is an energy conversion mechanism that converts the thermal energy generated by the combustion of fuel into mechanical energy. () (√)
25. [Judgment question] The shift clutch in the power shift transmission is the same as the main clutch, which is generally spring-loaded and mechanically separated. (×)
26. [Judgment] The more active materials on the plates, the larger the capacity of the battery. (√)
27. [Judgment question] The purpose of the "Special Equipment Safety Law of the People's Republic of China" is to strengthen the safety of special equipment, prevent accidents of special equipment, ensure the safety of personal and property, and promote economic and social development. (√)
28. [Judgment] The wheels are mainly composed of hubs, spokes, rims and tires. (√)
29. [Judgment question] Continuously improve the driver's safety technical quality, and often maintain the good technical status of the vehicle. The company's strengthened management of the transportation safety in the factory is the basic guarantee for safe transportation in the factory. (√)
30. [Multiple Choice Question] The viscosity of diesel is too large, its fluidity and atomization and evaporation (). (B)
A, get better
B, getting worse
C, unchanged
D. Not sure
31. [Single-choice question] The regulating component that controls the cooling water circulation mode is (). (C)
A. Water pump
B. Thermometer
C. Thermostat
D. Water jacket
32. [Single-choice question] When driving on icy and snowy roads, the braking distance will be (). (C)
A, shorter
B. Slow down
C, lengthen
33. [Multiple Choice Question] The Law of the People ’s Republic of China on Special Equipment Safety stipulates that units that use special equipment should register for use with the department responsible for special equipment safety supervision and management. () It should be placed or attached to a prominent position of the special equipment. (C)
A. Use certificate
B. Registration certificate number
C. Registration mark
D. Name of registration authority
34. [Single-choice question] The maximum driving speed of cars, forklifts, and battery vehicles at the intersections of various workshops and workshops, next to motorized equipment, is () km / h. (A)
A、3
B、5
C、10
D、15
35. [Single-choice question] The electrical equipment of a motor vehicle consists of () two parts. (A)
A. Power supply equipment and electrical equipment
B. Battery and lighting
C. Battery and instrument
36. [Single-choice question] The "Special Equipment Safety Law of the People's Republic of China" stipulates that the legal liability of a unit that uses special equipment for the safety management, testing, and operation of special equipment is (). (B)
A. Revocation of business license
B. Order to make corrections within a time limit; if no corrections are made within the time limit, order to stop using the relevant special equipment or stop production and business for rectification, and impose a fine of not less than 10,000 yuan but not more than 50,000 yuan
37. [Single-choice question] The sight blind area refers to the area of sight () that the driver is affected by the sight and cannot observe during driving. (C)
A. Scope
B. Angle
C. Dead end
38. [Single-choice question] Accidents should be based on the principle of "() not let go", identify the cause, clarify responsibilities, and deal with it seriously. (B)
A, three
B, four
C, five.
39. [Multiple Choice Question] In the hydraulic system, the role of the gear oil pump is () (C)
A. Controlling the lifting cylinder
B. Control tilt cylinder
C. Provide hydraulic energy
40. [Single-choice question] Forklift model CPDXXX indicates (). (A)
A. Balance-weight battery forklift
B. Balance-weight internal combustion forklift
41. [Single-choice question] Supervision, inspection and handling of the motor vehicle driver () enterprise safety and technology department, competent department and its management personnel within the enterprise. (C)
A. Indirect compliance
B. Partial obedience
C, must obey.
42. [Single-choice question] The number () s should be sounded before the vehicle starts. It is strictly forbidden to start without sounding. (C)
A、0.8～0.9
B、0.6～0.8
C、1～2
43. [Single-choice question] When electrical equipment, lines, etc. catch fire, you can use () to save. (B)
A, water
B. Carbon dioxide fire extinguisher
44, [single choice] Mechanical transmission should be filled (). (A)
A. Gear oil
B. Diesel engine oil
C, hydraulic oil
D, butter
45. [Single-choice question] When the battery is charged, () is stored. (A)
A. Conversion of electrical energy into chemical energy
B. Conversion of chemical energy into electrical energy
C. Convert electrical energy into mechanical energy
46. [Multiple choice questions] Through the analysis of the accident, find out the experience and lessons from the accident () and other aspects in order to improve the management technical level. (ABCD)
A. Design and manufacture
B. Installation
C, operation
D. Inspection
47. [Multiple choice questions] The hazards of speeding are: (). (ABD)
A. The centrifugal force increases when turning, and it is prone to lateral rollover
B. "Heavy" phenomenon occurs in concave sections
C. The braking distance is reduced
D. Increase the impact force during braking
48. [Multiple choice questions] The reasons for brake failure are (). (AB)
A. There is oil on the brake friction plate
B. Leakage or air leakage in the brake line
C. The bearings are damaged
49. [Multiple choice questions] The function of the clutch is (). (ABC)
A. Ensure that the vehicle starts smoothly
B. To ensure the smooth speed change of the vehicle
C. Prevent overloading of transmission mechanism
D. Prevent vehicles from sliding on slopes
50. [Multiple choice questions] The "Special Equipment Safety Law of the People's Republic of China" stipulates that units producing and using special equipment shall establish and improve special equipment () and (). (AC)
A. Safety responsibility system
B. Post safety management system
C. Energy saving responsibility system
The above are the types of exam questions for forklift drivers. It supports test questions for precision forklift drivers in various regions of the country, as well as practice test bank exercises such as safety qualification certificates, special operation licenses, and professional skill appraisals.
