The source of the question bank: the safety production simulation exam one-touch public account applet
A special equipment related management (boiler, pressure vessel and pressure pipe) simulation test test questions, which is prepared by the public number safety production simulation test, combined with the national examination outline and the national examination question bank. Test questions Random test questions simulation test training, you need to complete the given A special equipment related management (boiler pressure vessel pressure piping) simulation test system to answer the questions within the specified time. A. Special equipment related management (boiler pressure vessel pressure pipeline) simulation test questions. Click on A special equipment related management (boiler pressure vessel pressure pipeline) mobile phone synchronous practice on the public number safety production simulation exam. A Special equipment related management (boiler, pressure vessel and pressure pipeline) test questions have been updated to the latest question bank! A special equipment related management (boiler pressure vessel pressure piping) simulation exam can help you quickly pass the 2020A special equipment related management (boiler pressure vessel pressure piping) exam.
1. [Judgment question] () The gas-using unit should purchase the bottled gas filled by the unit that has obtained the gas bottle filling permission. (√)
2. [Judgment] () The online inspection of the pressure pipeline can be carried out by qualified online inspection personnel of the user. (√)
3. [Judgment question] () The operator can only put into operation after confirming that the pressure vessel, auxiliary equipment, safety device, etc. meet the requirements. (√)
4. [Judgment question] () Before filling the gas cylinder, the gas cylinder filling unit can directly fill the gas cylinder without first confirming that the property rights of the gas cylinder, the filling medium, the period of validity of the periodic inspection and other information comply with the regulations through the electronic label reader operation. (×)
5. [Judgment] () The high-pressure water pipeline belongs to the monitoring scope of the pressure pipeline. (×)
6. [Judgment] () The installation unit of the pressure pipeline shall obtain the installation license for special equipment, and the installation unit shall be responsible for the installation quality of the pipeline. (√)
7. [Judgment question] () The "use registration certificate" of the mobile pressure vessel does not need to be carried with the vehicle. (×)
8. [Judgment] () The gas cylinder filling unit shall not fill gas cylinders without electronic tags or electronic tags that cannot be read and written normally. (√)
9. [Judgment] () No technical (product) identification is required before the mass production of boilers. (×)
10. [Judgment] () Before the inspection, the residual toxic and combustible gas in the gas cylinder can be directly discharged into the atmosphere. (×)
11. [Judgment] In the operation of the enamel reaction vessel, if the pressure and temperature fluctuate too much, it will easily cause cracking, bulging and deformation of the lining. () (√)
12. [Judgment question] () The scale of the pressure gauge dial is ambiguous, but as long as the indication of the pressure gauge is still accurate within the valid period of verification, it can continue to be used until the verification period expires. (×)
13. [Judgment question] The end cap is detachable and connected to the cylinder by a flange or the like. () (√)
14. [Judgment] () If the pressure vessel has an accident, the main person in charge of the user unit shall be legally responsible. (×)
15. [Judgment question] The unit using special equipment shall be responsible for the safety and environmental protection management of special equipment in accordance with the provisions of the "Administrative Rules for the Use of Special Equipment", and shall bear the main responsibility for the safety and environmental protection of special equipment. (×)
16. [Judgment Questions] () After the boiler design document has passed the appraisal, the appraisal agency shall affix a special seal for the special equipment design document appraisal to the main design document. (√)
17. [Judgment question] () It is one of the duties of boiler management personnel to supervise the maintenance of boilers and their auxiliary equipment and implement the regular maintenance plan. (√)
18. [Judgment] () When the boiler leaves the factory, if the boiler manufacturer provides the boiler boiler quality certificate to the user, it may not provide the boiler drawing, calculation book and related technical documents to the user. (×)
19. [Judgment question] () Pressure piping components include pipes, fittings, flanges, gaskets, fasteners, valves, safety protection facilities, excluding such as expansion joints, flexible joints, pressure hoses, filters , Instruments and separators in the pipeline, etc. (×)
20. [Judgment question] () The unqualified pipeline components or materials shall not be used, and they shall be marked when stacked with the qualified pipeline components. (×)
21. [Judgment question] () If the concentration of combustible gas in the air is lower than the lower explosion limit, it will explode due to excessive air and encountering a fire source. (×)
22. [Judgment question] () The user should carry out on-site preparation work for a comprehensive inspection to ensure that the pipeline provided for inspection is in a suitable state for inspection; (√)
23. [Judgment] The conical pressure vessel is a structure composed of a circular cylinder and a cone. () (√)
24. [Judgment] () The national market supervision department is responsible for the safety supervision and management of the design, manufacture, installation and construction, renovation and maintenance, use management, inspection and testing of pressure pipes. (√)
25. [Judgment question] () According to the "Regulations", all pipelines under pressure must be subject to safety supervision (×)
26. [Judgment] The operating mechanism of the valve should be installed in a place convenient for operation and maintenance. () (√)
27. [Judgment question] Acquired defects refer to defects generated during the use, maintenance and reconstruction of pressure vessels. () (√)
28. [Judgment question] () When the pressure vessel is repaired or modified, the digging method cannot be used. (×)
29. [Single-choice question] The manufacturing license obtained by the pressure vessel manufacturing enterprise shall be valid nationwide within (years) from the date of issuance. Relevant departments in various places shall not conduct repeated examinations and repeated issuances. (A)
A、4
B、5
C、6
30. [Single-choice question] The unit of the pressure vessel is fully responsible for the safety production of the unit. (C)
A. Security administrator
B. Squad leader
C. Main person in charge
31. [Single-choice question] Before and after the filling of the gas cylinders, the operator of the filling and holding certificate shall carry out () inspection on the gas cylinders. (A)
A, one by one
B. Sampling
C, batch
32. [Single-choice question] The "CS" stamp is one of the cylinder production units (). (D)
A. Manufacturer's mark;
B. Design mark;
C. Marking of imported bottles;
D. Supervision and inspection mark.
33. [Single-choice question] When an industrial steam boiler suffers from severe water shortage, it cannot first be immediately (). (A)
A. Water supply
B. Steam supply
C. Air supply
34. [Single-choice question] It means () that the substance in the industrial pipeline is a dangerous chemical. (C)
A, identification color
B. Identification symbol
C. Hazard identification
D. Fire protection sign
35. [Single-choice question] Gas cylinders with electronic tags, but the electronic tags cannot be read and written normally, are filled by gas cylinder filling units (). (B)
A, you can
B. No
C. It can be filled with the consent of the person in charge
36. [Multiple Choice Question] Regarding the reformation of pressure pipelines, the installation unit shall inform the plan of the reformation in writing before construction () before construction. (A)
A. Use registration authority
B. Inspection agency
C. Non-destructive testing unit
D. Design unit
37. [Single-choice question] The "Regulations for Periodic Inspection of Industrial Pipes in Use" stipulates that there is a safety protection device that does not have a product certificate and nameplate and whose performance does not meet the requirements (), and it is not allowed to continue using it. (C)
A, high precision
B, the media often overpressure
C. Overdue inspection and verification
D. The design unit is not clear
38. [Multiple Choice Question] When the gauge pressure on the pressure vessel is greater than "0", it means () of this pressure vessel. (B)
A. The absolute pressure is less than 0;
B. The medium is under positive pressure;
C. In a state of negative pressure
39. [Single-choice questions] Boiler users should establish safety technical files one by one, () is not the content required by the safety technical files. (D)
A. Factory technical documents of the boiler (including product energy efficiency test report)
B. Technical information on boiler installation, reconstruction and repair
C. Periodic inspection report of boiler
D. Qualification certificates of relevant operators
40. [Single choice question] () does not belong to the content of boiler internal inspection. (D)
A. Spot checks on inflation
B. Spot check on boiler sealing and insulation
C. Spot check on water (media) treatment.
D. Spot check on the use of management knowledge system and its implementation
41. [Multiple Choice Question] According to the "Special Equipment Safety Regulations" promulgated by the State Council, gas cylinders belonging to pressure vessels should meet the following conditions: namely, the nominal working pressure of the container is greater than or equal to () MPr (gauge pressure), and the pressure Gas cylinders with a product of volume greater than or equal to 1.0 MPr.L of gas, liquefied gas, and liquid with a standard boiling point of 60 ℃ or less. (B)
A、0.1
B、0.2
C、0.3
D、0.4
42. [Single-choice questions] Periodic calibration of the pressure gauge should be performed by (). (C)
A. Use unit
B. Inspection unit
C. National legal measurement and inspection unit
43. [Single-choice question] The identification color of the medium is water (). (A)
A, brilliant green
B, scarlet
C. Medium yellow
D, light blue
44. [Multiple choice questions] The online inspection mainly checks whether the pipeline has abnormal conditions that affect safety under operating conditions, generally (), and wall thickness measurement and resistance value measurement if necessary. (AB)
A. Visual inspection
B. Safety protection device inspection
C. Material
D. Performance
45. [Multiple choice questions] "Pressure Pipeline Standard Industrial Pipeline" stipulates the basic requirements of industrial metal pressure pipelines. (ABCD)
A. Design
B. Production and installation
C. Inspection
D. Safety protection
46. [Multiple choice questions] The quality acceptance of industrial metal pipeline engineering can be divided according to (). (ABC)
A. Sub-project
B. Division (sub-division) engineering
C. Unit (subunit) engineering
D. None of the other options
47. [Multiple choice questions] The following medium is toxic gas (). (CD)
A. Hydrogen
B, sodium cyanide
C, carbon monoxide
D. Chlorine
48. [Multiple choice questions] The annual inspection of pressure vessels includes at least (). (ABCD)
A. Safety management inspection
B. Container body
C. Operation status check
D. Safety accessories inspection
49. [Multiple choice questions] The heat tracing methods of pressure pipes are (). (ABCD)
A, inner heating tube
B. External heating tube
C, jacket heating
D. Electric heating
50. [Multiple choice questions] Toxic medium refers to the general name of the fluid with the degree of toxicity defined by the national standard GB5044 (). (ABCD)
A. Extremely hazardous
B. Highly hazardous
C. Moderate hazards
D. Mild hazard
The above are the types of test questions for A special equipment related management (boiler, pressure vessel and pressure piping) examination. Support precise A special equipment related management (boiler, pressure vessel, and pressure piping) test questions in various regions of the country, and support practice qualifications such as safety qualification certificates, special operation operation certificates, and occupational skill identification.
