Source of question bank: Safety production mock examination, WeChat public account mini program
2021 N1 forklift driver answer analysis and N1 forklift driver review test, including N1 forklift driver answer analysis and analysis, and N1 forklift driver review test exercises. Combining the latest syllabus of the national N1 forklift driver exam and the summary of the real questions of the N1 forklift driver exam from the safety production simulation test Yidiantong public account, it is helpful to practice before the N1 forklift driver homework exam.
1. [Judgment] The preparation of emergency plans should be based on the characteristics of special equipment, for possible accidents, and for sudden disasters that may cause death or serious injury to equipment, and severe damage to equipment. () (√)
2. [True and True] The ignition mode of gasoline engine and diesel engine is the same. () (×)
3. [True/Treatment] In principle, gasoline engine oil and diesel engine oil can be used mutually. () (×)
4. [True/True] Forklift trucks can increase their carrying capacity by adding counterweights. () (×)
5. [Judgement Questions] The "Safety Regulations for Railway and Road Transportation in Industrial Enterprises" is applicable to the design, construction, and production of railways, roads and their loading and unloading (including the number of docks belonging to the factory) of industrial enterprises. (√)
6. [Judgement Questions] According to the "Technical Supervision Regulations for Special Motor Vehicle Safety in Field (Factory)", repair refers to changing one of the original vehicle power mode, transmission mode, mast structure, frame structure, and metal structure of the body , Or the activity of changing the original main parameters of the vehicle. () (×)
7. [True/True Question] Severe wear of the clutch friction plate is unlikely to cause the clutch to slip. () (×)
8. [True and True] When the truck needs to be stored for a long time, you can park the truck directly without special treatment. () (×)
9. [True/True Question] Reach trucks belong to the category of yard trucks. () (√)
10. [True and True] Both the clutch pedal and the brake pedal should have free travel. () (√)
11. [True and True] In order to save costs, the forks of explosion-proof forklifts can be replaced with ordinary forks, as long as they are careful not to rub the ground. () (×)
12. [True/True Question] Increasing the maximum lifting speed of the forklift can improve its operating efficiency. Therefore, the greater the maximum lifting speed of the forklift, the better. () (×)
13. [True and True] When a forklift enters and exits the warehouse door and workshop, the forklift is allowed to open the door. () (×)
14. [True/True Question] The wheels not only support the weight of the entire vehicle, but also absorb the impact vibration generated when rolling on the road, so that the vehicle can run smoothly. () (√)
15. [True/Treatment] When the vehicle is overhauled, it is not allowed to use matches, lighters and other open flames for lighting. Check the fuel tank fuel level and fuel leakage pipelines. Use as little or no type of fire as possible around the vehicle. () (√)
16. [True and True] The mast tilts forward to prevent the goods on the forks from slipping off when the forklift is moving. () (×)
17. [True and True] If necessary, non-explosion-proof battery vehicles can also enter flammable and explosive hazardous areas for operations. () (×)
18. [Judgement Question] Among the road traffic signs, only the indicator signs are the main signs, and the others are all auxiliary signs. () (×)
19. [True and True] The intake stroke of a four-stroke engine is that the piston moves from top dead center to bottom dead center. () (√)
20. [True and True] Front-moving forklift refers to a non-stacking hoisting vehicle with outriggers and moving loads through the mast or sliding frame. () (×)
21. [Judgement Questions] The "Technical Supervision Regulations for the Safety of Special Motor Vehicles in the Field (Factory)" stipulate that if the forklift is in use, if the fork is replaced with other attachments, the safety of the equipment is the responsibility of the attachment manufacturer. (×)
22. [True and True] It is a general violation to use special motor vehicles in the field (factory) that have not passed the inspection. () (×)
23. [Judgement Questions] () The "Special Equipment Safety Law of the People's Republic of China" stipulates that special equipment manufacturers shall ensure that the production of special equipment meets the requirements of safety technical specifications and related standards, and is responsible for the quality of the special equipment they produce. (×)
24. [True/True] The driver is working in an unstable state to make it in an unsafe state. () (√)
25. [True and True] The fuel gauge is used to indicate the fuel level in the fuel tank of the truck. () (√)
26. [Judgement Questions] () The "Special Equipment Safety Law of the People's Republic of China" stipulates that when special equipment fails or has abnormal conditions, special equipment users should conduct a comprehensive inspection to eliminate hidden accidents before they can continue to use them. (√)
27. [True/True Question] The fluid coupling can improve driving comfort, reduce the intensity of driving operation, and prolong the service life of parts. () (√)
28. [True and True] The driver does not obey the command and order, and it is easy to put it in an unsafe state. () (√)
29. [True/True] When a vehicle passes through a muddy road, generally use a medium speed or a low speed, and try to avoid shifting or stopping midway, and the steering angle should be small. () (√)
30. [Single choice] The "Special Equipment Safety Law of the People's Republic of China" stipulates that special equipment production, operation, and use units shall provide special equipment inspection and testing institutions and their inspection and testing personnel with special equipment in accordance with the requirements of safety technical specifications. Data and necessary inspection and testing conditions, and be responsible for the data (). (A)
A. Authenticity
B. Completeness
C. Unity
31. [Single-choice question] What is the component pointed to? 
(B)
A. Lifting cylinder
B. Chain
C. Sprocket
32. [Single-choice question] The maximum traveling speed of vehicles, forklifts, and battery vehicles at intersections of various plants and workshops, next to motorized equipment, is () km/h. (A)
A、3
B、5
C、10
D、15
33. [Single-choice question] The set working pressure of the overflow safety valve generally does not exceed the rated working pressure of the system (), and shall not exceed the maximum working pressure allowed by the oil pump. (B)
A、100%
B、125%
C、155%
34. [Single-choice question] The "Technical Supervision Regulations for the Safety of Special Motor Vehicles in the Field (Factory)" stipulates that the field vehicle inspection should be submitted to the special equipment inspection agency () months before the expiry of the validity period to apply for regular inspection and accept the inspection. And do a good job of regular inspection related work. (A)
A、1
B、2
C、3
D、4
35. [Single-choice questions] The vehicle running period is generally reduced according to regulations (). (B)
A、10％～20％
B、20％～25％
C、25％～40％
36. [Single-choice question] When the forklift faces the stack of forks, the driver should adjust the mast to the () position. (A)
A. Lean forward slightly
B. Lean back
C, vertical
37. [Single-choice question] The forklift shall not exceed ()km/h on the main road in the factory. (A)
A、10
B、20
C、30
D、40
38. [Single choice] Special motor vehicles in the field (factory) should be managed by () (C)
A. Transportation department
B. Public security department
C. Quality Supervision Department
D. Agricultural Machinery Department
39. [Single-choice question] Choose the correct viewpoint based on the following phenomena? 
(D)
A. The door must be opened manually when entering the garage
B. Vehicle maintenance needs to be stopped
C. During maintenance, the fork teeth need to be lowered to the ground
D. It is strictly forbidden for the driver to leave when the cargo is suspended
40. [Single-choice question] Pressure of diesel fuel injection pump () Pressure of fuel delivery pump. (A)
A, greater than
B, less than
C, equal
D, greater than or less than
41. [Single-choice question] To keep the vehicle's technical condition in good condition, the vehicle must be scientifically managed, used correctly, mandatory maintenance, and repaired as appropriate. Among them, (). (B)
A. Vehicles are the foundation and technology is the key
B. Management is the foundation, use is the key
C. The masses are the foundation and the leadership is the key
42. [Single choice] When the vehicle starts, you should () and start slowly. (A)
A. Depress the clutch completely, put into gear first, then release the hand brake, and check whether there is an incoming car through the rearview mirror, and then slowly lift the clutch and refuel appropriately
B. Step on the brake pedal first, then the accelerator pedal
C. Turn on the headlights first, then put in gear, and finally step on the accelerator pedal
43. [Multiple choice questions] The possible reasons for the speaker not sounding are (). (AB)
A, the fuse is burned out
B. Poor electrical connection
C. Low voltage
D. Small current
44. [Multiple choice questions] The main components of gasoline (). (AB)
A, charcoal
B. Hydrogen
C, oxygen
D, nitrogen
45. [Multiple Choice Questions] The "Special Equipment Safety Law of the People's Republic of China" stipulates that this law applies to the production (design, manufacturing, installation, transformation, repair), () and the supervision and management of special equipment safety. (ACDE)
A. Operation
B. Transportation
C. Use
D. Inspection
E. Detection
46. [Multiple choice] The characteristic of counterbalanced forklift is (). (BD)
A. The lifting load acts on the wheel support plane
B. The lifting load acts outside the wheel support plane
C. After the cargo is heavy, the axle is the axis, which produces a large overturning moment
D. The front axle is the axis of the cargo weight, which produces a large tipping moment
47. [Multiple choice questions] Internal combustion forklifts are divided into () types according to fuel types. (ABC)
A. Gasoline forklift
B. Diesel forklift
C. Liquefied gas forklift
48. [Multiple-choice questions] There will be symptoms such as () when cavitation occurs in the hydraulic pump and the suction line. (ABC)
A. Shock and vibration
B. Noise
C, high temperature
49. [Multiple choice questions] Emergency measures for special equipment include the following (). (ABCD)
A. Response measures and handling methods in case of accident
B. Post-accident handling procedures
C. Responsibilities of personnel from relevant departments
D. Regular drills
50. [Multiple choice questions] Forklift operation performance includes (). (AD)
A. Traction performance
B. Mast angle
C. Stability
D. Braking performance
The above is the answer analysis of the N1 forklift driver in 2021 and the N1 forklift driver review examination. Support accurate N1 forklift driver test questions in all regions of the country, support safety qualification certificate, special operation certificate, vocational skill appraisal and other types of job exercises.