版权声明：本文为博主原创文章，未经博主允许不得转载。 https://blog.csdn.net/alcoholdi/article/details/54948058
网上很多文章都说写Hanlder，需要用static声明为静态的，还需要用弱引用包裹构造函数传来的Activity实例。
比如这篇英文博客
http://www.androiddesignpatterns.com/2013/01/inner-class-handler-memory-leak.html
里面的Sample是这样写的
public class SampleActivity extends Activity {
/**
* Instances of static inner classes do not hold an implicit
* reference to their outer class.
*/
private static class MyHandler extends Handler {
private final WeakReference<SampleActivity> mActivity;
public MyHandler(SampleActivity activity) {
mActivity = new WeakReference<SampleActivity>(activity);
}
@Override
public void handleMessage(Message msg) {
SampleActivity activity = mActivity.get();
if (activity != null) {
// ...
}
}
}
private final MyHandler mHandler = new MyHandler(this);
/**
* Instances of anonymous classes do not hold an implicit
* reference to their outer class when they are "static".
*/
private static final Runnable sRunnable = new Runnable() {
@Override
public void run() { /* ... */ }
};
@Override
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
// Post a message and delay its execution for 10 minutes.
mHandler.postDelayed(sRunnable, 1000 * 60 * 10);
// Go back to the previous Activity.
finish();
}
}post，postDelayed这种传Runnable的方法是不会触发handleMessage方法的。
所以用一下sendEmptyMessageDelayed测试一下
public class SampleActivity extends Activity {
private ImageView iv;
/**
* Instances of static inner classes do not hold an implicit
* reference to their outer class.
*/
private static class MyHandler extends Handler {
private final WeakReference<SampleActivity> mActivity;
public MyHandler(SampleActivity activity) {
mActivity = new WeakReference<SampleActivity>(activity);
}
@Override
public void handleMessage(Message msg) {
SampleActivity activity = mActivity.get();
Log.e("YAO", "MyHandler - handleMessage ------ 消息到达了 activity!=null:" + (activity != null));
if (activity != null) {
// ...
}
}
}
private final MyHandler mHandler = new MyHandler(this);
/**
* Instances of anonymous classes do not hold an implicit
* reference to their outer class when they are "static".
*/
// private static final Runnable sRunnable = new Runnable() {
// @Override
// public void run() { /* ... */ }
// };
@Override
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
//塞一张大一点的图片,用来增大Activity的所需内存,可以更好的查看Memory趋势图
iv = new ImageView(this);
iv.setImageResource(R.drawable.demo);
// Post a message and delay its execution for 10 minutes.
//mHandler.postDelayed(sRunnable, 1000 * 60 * 10);
mHandler.sendEmptyMessageDelayed(0, 1000L * 30);
// Go back to the previous Activity.
finish();
}
}打开这个Activity后会自动finish，然后点一下Android Monitor里面的Initiate GC按钮，触发GC操作。
此时Dump Java Heap看看内存情况
可以看到SampleActivity已经被回收了，什么都没有。
而里面的MyHandler还存在，这里还可以看到Handler只持有一个Message对象。
等了30秒消息到达后，日志打印出
02-11 15:22:15.033 7153-7153/com.yao.memorytest E/YAO: MyHandler - handleMessage ------ 消息到达了 activity!=null:false
说明SampleActivity已经被回收了。
重来一次，这次不点击Initiate GC按钮，Dump Java Heap后
对比前面两张图，可以看到SampleActivity还存在。从MyHandler看，这个实例除了有一个Message对象，还有一个SampleActivity对象（注意这个对象是红色的）。
等30秒结果打印出
02-11 15:24:15.033 7153-7153/com.yao.memorytest E/YAO: MyHandler - handleMessage ------ 消息到达了 activity!=null:true
说明关闭页面30秒后，弱引用Activity还在。
如果把static关键字去掉
由于非静态内部类会持有外部类的一个隐式引用。所以MyHandler持有一个当前SampleActivity对象实例（此时这个对象是白色的）。
可以看到，对于static内部类，用弱引用都会把SampleActivity标成红色。而不用static关键字，则是白色。
猜测一下，红色代表的是待回收内存，下次GC后会被回收。白色代表还在使用，GC后不会被回收的内存。
改写一下代码，现在改成使用postDelayed方法，此时按照之前得出的结论Runnable也必须是静态的。
如果Runnable里面有跟当前Activity相关的代码，也得加个弱引用Activity。
public class SampleTwoActivity extends Activity {
private ImageView iv;
/**
* Instances of static inner classes do not hold an implicit
* reference to their outer class.
*/
private static class MyHandler extends Handler {
// private final WeakReference<SampleTwoActivity> mActivity;
//
// public MyHandler(SampleTwoActivity activity) {
// mActivity = new WeakReference<SampleTwoActivity>(activity);
// }
//
// @Override
// public void handleMessage(Message msg) {
// SampleTwoActivity activity = mActivity.get();
// Log.e("YAO", "MyHandler - handleMessage ------ 消息到达了 activity!=null:" + (activity != null));
// if (activity != null) {
// // ...
// }
// }
}
private final MyHandler mHandler = new MyHandler();
/**
* Instances of anonymous classes do not hold an implicit
* reference to their outer class when they are "static".
*/
private static class MyRunnable implements Runnable {
private final WeakReference<SampleTwoActivity> mActivity;
public MyRunnable(SampleTwoActivity activity) {
mActivity = new WeakReference<SampleTwoActivity>(activity);
}
@Override
public void run() {
SampleTwoActivity activity = mActivity.get();
Log.e("YAO", "MyRunnable - run ------ 执行延时Runnable activity!=null:" + (activity != null));
if (activity != null) {
activity.iv.setVisibility(View.VISIBLE);
}
}
}
private final MyRunnable mMyRunnable = new MyRunnable(this);
@Override
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
//塞一张大一点的图片,用来增大Activity的所需内存,可以更好的查看Memory趋势图
iv = new ImageView(this);
iv.setImageResource(R.drawable.demo);
// Post a message and delay its execution for 10 minutes.
mHandler.postDelayed(mMyRunnable, 1000L * 30);
//mHandler.sendEmptyMessageDelayed(0, 1000L * 30);
// Go back to the previous Activity.
finish();
}
}Dump Java Heap看看
MyRunnable也持有一个Activity的弱引用，红色的。执行一下GC，Activity也意料之中的被回收了。
等30秒结果打印出
02-12 03:31:18.215 7501-7501/com.yao.memorytest E/YAO: MyRunnable - run ------ 执行延时Runnable activity!=null:false
以上是发送用Handler发送延时消息，延时任务的情况。
可以看出用上静态内部类+弱引用Handler的确能解决内存泄露的问题，同时得注意Runnable也需要用上静态弱引用才行。
然而有个更好的方法removeCallbacksAndMessages
public class SampleFourActivity extends Activity {
private ImageView iv;
private class MyHandler extends Handler {
@Override
public void handleMessage(Message msg) {
Log.e("YAO", "MyHandler - handleMessage ------ 消息到达了");
iv.setVisibility(View.VISIBLE);
}
}
private final MyHandler mHandler = new MyHandler();
@Override
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
//塞一张大一点的图片,用来增大Activity的所需内存,可以更好的查看Memory趋势图
iv = new ImageView(this);
iv.setImageResource(R.drawable.demo);
// Post a message and delay its execution for 10 minutes.
//mHandler.postDelayed(sRunnable, 1000 * 60 * 10);
mHandler.sendEmptyMessageDelayed(0, 1000L * 30);
// Go back to the previous Activity.
finish();
}
@Override
protected void onDestroy() {
super.onDestroy();
mHandler.removeCallbacksAndMessages(null);
}
}发送长时间的延时消息/任务其实是少见，更多的是比如我们经常开线程联网访问或者开线程做一些耗时计算，结束后才通过Handler发送消息更新UI，应该是这样的。
public class SampleThreeActivity extends Activity {
private ImageView iv;
/**
* Instances of static inner classes do not hold an implicit
* reference to their outer class.
*/
private static class MyHandler extends Handler {
}
private final MyHandler mHandler = new MyHandler();
/**
* Instances of anonymous classes do not hold an implicit
* reference to their outer class when they are "static".
*/
private static class MyRunnable implements Runnable {
private final WeakReference<SampleThreeActivity> mActivity;
public MyRunnable(SampleThreeActivity activity) {
mActivity = new WeakReference<SampleThreeActivity>(activity);
}
@Override
public void run() {
Log.e("YAO", "TestMemoryActivity.java - run() ---------- 工作线程正在执行耗时任务....");
SystemClock.sleep(1000L * 30);
SampleThreeActivity activity = mActivity.get();
Log.e("YAO", "MyRunnable - run ------ 执行延时Runnable activity!=null:" + (activity != null));
if (activity != null) {
activity.mHandler.obtainMessage().sendToTarget();
}
}
}
private final MyRunnable mMyRunnable = new MyRunnable(this);
@Override
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
//塞一张大一点的图片,用来增大Activity的所需内存,可以更好的查看Memory趋势图
iv = new ImageView(this);
iv.setImageResource(R.drawable.demo);
// Post a message and delay its execution for 10 minutes.
//mHandler.postDelayed(mMyRunnable, 1000 * 30);
//mHandler.sendEmptyMessageDelayed(0, 1000L * 30);
new Thread(mMyRunnable).start();
// Go back to the previous Activity.
finish();
}
}
发现Activity是红色的可回收内存，没啥问题。
但是改一下run方法里面的代码。
@Override
public void run() {
SampleThreeActivity activity = mActivity.get();
if (activity != null) {
//通过弱引用去获取Activity的成员变量参数(比如网址url)，再跑耗时任务。
String url = activity.url;
Log.e("YAO", "TestMemoryActivity.java - run() ---------- 工作线程正在执行耗时任务....");
SystemClock.sleep(1000L * 30);
activity.mHandler.obtainMessage().sendToTarget();
}
}
所以用了弱引用的get方法后，相当于会把内存中的弱引用转为强引用。
所以如果是这种方式的话，建议退出这个Activity时取消这个任务。Thread是没有提供取消任务的方法的。可以用AsyncTask的cancel方法，ExecutorService的shutdown方法，当然一般网络框架volley、okhttp这些也会提供相应的取消请求方法。
（较真一点如果在使用AsyncTask时也改成静态内部类+弱引用当然也可以，但是非常麻烦，AsyncTask运行在UI线程的onPreExecute、onProgressUpdate、onPostExecute使用到Activity中的成员变量的话，都需要进行弱引用Activity的判空方法，相当麻烦。）
static class MyAsyncTask extends AsyncTask<Void, Void, Void> {
private final WeakReference<SampleFiveActivity> mActivity;
public MyAsyncTask(SampleFiveActivity activity) {
mActivity = new WeakReference<SampleFiveActivity>(activity);
}
@Override
protected void onPreExecute() {
SampleFiveActivity activity = mActivity.get();
Log.e("YAO", "MyAsyncTask - onPreExecute ------ activity!=null:" + (activity != null));
if (activity != null) {
activity.iv.setVisibility(View.VISIBLE);
}
}
@Override
protected Void doInBackground(Void... params) {
Log.e("YAO", "TestMemoryActivity.java - run() ---------- 工作线程正在执行耗时任务....");
SystemClock.sleep(1000L * 30);
return null;
}
@Override
protected void onPostExecute(Void aVoid) {
SampleFiveActivity activity = mActivity.get();
Log.e("YAO", "MyAsyncTask - onPostExecute ------ activity!=null:" + (activity != null));
if (activity != null) {
activity.iv.setVisibility(View.VISIBLE);
}
}
}总结就是，以后我使用handler估计只会用Handler.removeCallbacksAndMessages(null);这种方法了，方便快捷。