分布式医疗云平台【docker、JDK、redis、nacos 、sentinel、rocketmq 、fastdfs、mysql、mycat 等安装】(二)-全面详解（学习总结---从入门到深化）

编程语言 2023-06-05 10:37:37 阅读次数: 0

目录

docker安装

 JDK安装

redis安装

nacos控制台安装 

sentinel控制台安装 

rocketmq环境搭建 

fastdfs安装

mysql安装

mycat安装

docker安装

yum -y install docker 安装
systemctl start docker 启动
systemctl restart docker 重启
systemctl stop docker 停止
systemctl enable docker 开机自启

前方有坑---------如果你在 docker 运行期间操作了防火墙[启动或关闭]必须重启

docker systemctl restart docker

编辑配置文件

vi /etc/docker/daemon.json

拷贝下面的内容/etc/docker/daemon.json 中

{ "registry-mirrors":
["https://32xw0apq.mirror.aliyuncs.com"] }
systemctl daemon-reload
systemctl restart docker

 JDK安装

安装JDK11

如果是tar.gz文件，则执行解压缩命令

tar -zxvf jdk-11.0.11_linux-x64_bin.tar.gz

解压缩后，默认安装在当前目录下

在/etc/profile文件中设置java环境变量

输入命令检查安装是否完成

java -version

 出现上面的提示，表示jdk安装正常

redis安装

使用 docker 运行 redis

docker run -d --name redis -p 6390:6379 redis --requirepass "123456"

安装完成后，查看redis进程，如上图所示则安装正常

nacos控制台安装 

下载nacos压缩包，使用下面的命令解压缩

tar -zxvf nacos-server-1.2.0.tar.gz

进入nacos安装路径下的bin目录执行启动命令

./startup.sh -m standalone

 使用ps命令查看进程情况

 输入http://你的ip:8848，启动nacos控制台

sentinel控制台安装 

下载sentinel-dashboard-1.8.2.jar包，在jar包所在目录打开命令行窗口，执行以下命令启动控制台

java -jar sentinel-dashboard-1.8.2.jar

 输入默认用户名、密码sentinel，进入主界面

rocketmq环境搭建 

环境要求

JDK 11.0.5

4G+ free

可使用wget命令下载、解压缩并安装

wget
https://archive.apache.org/dist/rocketmq/4.5.1/
rocketmq-all-4.5.1-bin-release.zip

修改脚本

bin/runserver.sh

bin/runbroker.sh

bin/tools.sh

nameserver:

#!/bin/sh
# Licensed to the Apache Software Foundation
(ASF) under one or more
# contributor license agreements. See the
NOTICE file distributed with
# this work for additional information
regarding copyright ownership.
# The ASF licenses this file to You under the
Apache License, Version 2.0
# (the "License"); you may not use this file
except in compliance with
# the License. You may obtain a copy of the
License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed
to in writing, software
# distributed under the License is distributed
on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
either express or implied.
# See the License for the specific language
governing permissions and
# limitations under the License.
#==============================================
=============================================
# Java Environment Setting
#==============================================
=============================================
error_exit ()
{
echo "ERROR: $1 !!"
exit 1
}
[ ! -e "$JAVA_HOME/bin/java" ] &&
JAVA_HOME=$HOME/jdk/java
[ ! -e "$JAVA_HOME/bin/java" ] &&
JAVA_HOME=/usr/java
[ ! -e "$JAVA_HOME/bin/java" ] && error_exit
"Please set the JAVA_HOME variable in your
environment, We need java(x64)!"
export JAVA_HOME
export JAVA="$JAVA_HOME/bin/java"
export BASE_DIR=$(dirname $0)/..
export CLASSPATH=${BASE_DIR}/lib/rocketmqnamesrv4.5.0.jar:${BASE_DIR}/lib/*:${BASE_DIR}/conf:${
CLASSPATH}
#export
CLASSPATH=.:${BASE_DIR}/conf:${CLASSPATH}
#echo "BASE_DIR:$BASE_DIR"
#echo "CLASSPATH:$CLASSPATH"
#==============================================
=============================================
# JVM Configuration
#==============================================
=============================================
JAVA_OPT="${JAVA_OPT} -server -Xms1g -Xmx1g -
Xmn512m -XX:MetaspaceSize=128m -
XX:MaxMetaspaceSize=320m"
#JAVA_OPT="${JAVA_OPT} -server -Xms4g -Xmx4g -
Xmn2g -XX:MetaspaceSize=128m -
XX:MaxMetaspaceSize=320m"
JAVA_OPT="${JAVA_OPT} -
XX:CMSInitiatingOccupancyFraction=70 -
XX:+CMSParallelRemarkEnabled -
XX:SoftRefLRUPolicyMSPerMB=0 -
XX:+CMSClassUnloadingEnabled -
XX:SurvivorRatio=8"
JAVA_OPT="${JAVA_OPT} -verbose:gc -
Xlog:gc:/dev/shm/rmq_srv_gc.log"
JAVA_OPT="${JAVA_OPT} -XX:-
OmitStackTraceInFastThrow"
JAVA_OPT="${JAVA_OPT} -XX:-UseLargePages"
#JAVA_OPT="${JAVA_OPT} -Xdebug -
Xrunjdwp:transport=dt_socket,address=9555,serve
r=y,suspend=n"
JAVA_OPT="${JAVA_OPT} ${JAVA_OPT_EXT}"
JAVA_OPT="${JAVA_OPT} -cp ${CLASSPATH}"
$JAVA ${JAVA_OPT} $@

vim bin/runserver.sh

删除

UseCMSCompactAtFullCollection

UseParNewGC

UseConcMarkSweepGC 

修改内存：

JAVA_OPT="${JAVA_OPT} -server -Xms256m -Xmx256m
-Xmn128m -
XX:MetaspaceSize=64mm -
XX:MaxMetaspaceSize=160mm"

-Xloggc修改为-Xlog:gc

broker:

#!/bin/sh
# Licensed to the Apache Software Foundation
(ASF) under one or more
# contributor license agreements. See the
NOTICE file distributed with
# this work for additional information
regarding copyright ownership.
# The ASF licenses this file to You under the
Apache License, Version 2.0
# (the "License"); you may not use this file
except in compliance with
# the License. You may obtain a copy of the
License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed
to in writing, software
# distributed under the License is distributed
on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
either express or implied.
# See the License for the specific language
governing permissions and
# limitations under the License.
#==============================================
============================
# Java Environment Setting
#==============================================
============================
error_exit ()
{
echo "ERROR: $1 !!"
exit 1
}
[ ! -e "$JAVA_HOME/bin/java" ] &&
JAVA_HOME=$HOME/jdk/java
[ ! -e "$JAVA_HOME/bin/java" ] &&
JAVA_HOME=/usr/java
[ ! -e "$JAVA_HOME/bin/java" ] && error_exit
"Please set the JAVA_HOME
variable in your environment, We need
java(x64)!"
export JAVA_HOME
export JAVA="$JAVA_HOME/bin/java"
export BASE_DIR=$(dirname $0)/..
export
CLASSPATH=.${JAVA_HOME}/jre/lib/ext:${BASE_DIR}
/lib/*:${BASE_DIR}/conf:${CLASSPATH}
#==============================================
============================
# JVM Configuration
#==============================================
============================
JAVA_OPT="${JAVA_OPT} -server -Xms256m -Xmx256m
-Xmn128m"
JAVA_OPT="${JAVA_OPT} -XX:+UseG1GC -
XX:G1HeapRegionSize=16m -XX:G1ReservePercent=25
-XX:InitiatingHeapOccupancyPercent=30 -
XX:SoftRefLRUPolicyMSPerMB=0"
JAVA_OPT="${JAVA_OPT} -verbose:gc -
Xloggc:/dev/shm/mq_gc_%p.log -
XX:+PrintGCDetails"
JAVA_OPT="${JAVA_OPT} -XX:-
OmitStackTraceInFastThrow"
JAVA_OPT="${JAVA_OPT} -XX:+AlwaysPreTouch"
JAVA_OPT="${JAVA_OPT} -
XX:MaxDirectMemorySize=15g"
JAVA_OPT="${JAVA_OPT} -XX:-UseLargePages -XX:-
UseBiasedLocking"
#JAVA_OPT="${JAVA_OPT} -Xdebug -
Xrunjdwp:transport=dt_socket,address=9555,serve
r=y,suspend=n"
JAVA_OPT="${JAVA_OPT} ${JAVA_OPT_EXT}"
JAVA_OPT="${JAVA_OPT} -cp ${CLASSPATH}"
numactl --interleave=all pwd > /dev/null 2>&1
if [ $? -eq 0 ]
then
 if [ -z "$RMQ_NUMA_NODE" ] ; then
numactl --interleave=all $JAVA
${JAVA_OPT} $@
 else
 numactl --cpunodebind=$RMQ_NUMA_NODE --
membind=$RMQ_NUMA_NODE $JAVA
 ${JAVA_OPT} $@
 fi
else
 $JAVA ${JAVA_OPT} --addexports=java.base/jdk.internal.ref=ALL-UNNAMED
$@
fi
vim bin/runbroker.sh

删除：

PrintGCDateStamps
PrintGCApplicationStoppedTime
PrintAdaptiveSizePolicy
UseGCLogFileRotation
NumberOfGCLogFiles=5
GCLogFileSize=30m

tools:

#!/bin/sh
# Licensed to the Apache Software Foundation
(ASF) under one or more
# contributor license agreements. See the
NOTICE file distributed with
# this work for additional information
regarding copyright ownership.
# The ASF licenses this file to You under the
Apache License, Version 2.0
# (the "License"); you may not use this file
except in compliance with
# the License. You may obtain a copy of the
License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed
to in writing, software
# distributed under the License is distributed
on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
either express or implied.
# See the License for the specific language
governing permissions and
# limitations under the License.
#==============================================
============================
=================
# Java Environment Setting
#==============================================
============================
=================
error_exit ()
{
  echo "ERROR: $1 !!"
  exit 1
}
[ ! -e "$JAVA_HOME/bin/java" ] &&
JAVA_HOME=$HOME/jdk/java
[ ! -e "$JAVA_HOME/bin/java" ] &&
JAVA_HOME=/usr/java
[ ! -e "$JAVA_HOME/bin/java" ] && error_exit
"Please set the JAVA_HOME
variable in your environment, We need
java(x64)!"
export JAVA_HOME
export JAVA="$JAVA_HOME/bin/java"
export BASE_DIR=$(dirname $0)/..
# export
CLASSPATH=.:${BASE_DIR}/conf:${CLASSPATH}
export
CLASSPATH=.${JAVA_HOME}/jre/lib/ext:${BASE_DIR}
/lib/*:${BASE_DIR}/conf:${CL
ASSPATH}
#==============================================
============================
=================
# JVM Configuration
#==============================================
============================
=================
JAVA_OPT="${JAVA_OPT} -server -Xms256m -Xmx256m
-Xmn256m -XX:PermSize=128m
-XX:MaxPermSize=128m"
# JAVA_OPT="${JAVA_OPT} -
Djava.ext.dirs=${BASE_DIR}/lib:${JAVA_HOME}/jre
/lib/ext"
JAVA_OPT="${JAVA_OPT} -cp ${CLASSPATH}"
$JAVA ${JAVA_OPT} $@

vim bin/tools.sh
# 删除 JAVA_OPT="${JAVA_OPT} -
Djava.ext.dirs=${BASE_DIR}/lib:${JAVA_HOME}/jre
/lib/ext"

进入rocketmq目录，启动nameserver

nohup sh mqnamesrv > /dev/null 2>&1 &

然后启动broker

nohup sh mqbroker -n localhost:9876 > /dev/null
2>&1 &

fastdfs安装

1、下载fastdfs镜像

docker pull registry.cn-beijing.aliyuncs.com/tianzuo/fastdfs

2、启动镜像

docker run -d --restart=always --
privileged=true --net=host --name=fastdfs -e
IP=192.168.139.128 -e WEB_PORT=8888 -v
${HOME}/fastdfs:/var/local/fdfs registry.cn-beijing.aliyuncs.com/tianzuo/fastdfs

3、查看镜像

docker ps -a

5、测试上传

vim /etc/fdfs/client.conf
#需要修改的内容如下
base_path=/home/fastdfs
#tracker服务器IP和端口
tracker_server=192.168.139.128:22122
#保存后测试,返回ID表示成功 如：group1/M00/00/00/xxx.png
/usr/bin/fdfs_upload_file /etc/fdfs/client.conf /root/fastdfs/1.png


group1/M00/00/00/wKjTiF7h5EWASb5aAACGZa9JdFo611.png

mysql安装

下载必要的安装文件,按顺序执行安装命令，完成后初始化mysql， 修改初始密码

下载必要的安装文件,按顺序执行安装命令，完成后初始化mysql， 修改初始密码

先移除mariadb，再安装 解压缩mysql-5.7.28-1.el7.x86_64.rpm-bundle.tar，解压完成后会 生成一系列rpm安装包，安装的顺序是 1）mysql-community-common-5.7.28-1.el7.x86_64.rpm 2）mysql-community-libs-5.7.28-1.el7.x86_64.rpm 3）mysql-community-libs-compat-5.7.28-1.el7.x86_64.rpm 4）mysql-community-client-5.7.28-1.el7.x86_64.rpm 5）mysql-community-server-5.7.28-1.el7.x86_64.rpm 6）mysql-community-devel-5.7.28-1.el7.x86_64.rpm 

初始化mysql 

mysqld --initialize --user=mysql

查看初始密码

cat /var/log/mysqld.log

进入mysql，修改初始密码

>mysql -uroot -p
>set password=password('123456');

mycat安装

下载Mycat-server-1.6.7.5-release-linux.tar.gz，解压后进入 mycat/bin目录，执行启动命令

./mycat start 启动
./mycat stop 停止
./mycat restart 重启
./mycat status 查看状态

访问mycat，连接成功后和操作mysql一样

mysql -uroot -proot -h127.0.0.1 -P8066

mysql主从搭建

后面再细说

读写分离配置

后面再细说

idea安装

自行下载安装，项目中使用的是2020.2版本

猜你喜欢

转载自blog.csdn.net/m0_58719994/article/details/130668974
今日推荐
美国拟限制 AI 大模型出口中国和俄罗斯
苹果将与 OpenAI 达成协议，将 ChatGPT 应用于 iPhone
openKylin 社区生态委员会第六次会议圆满召开
阿里云正式发布通义千问 2.5
Python 3.13 发布首个 Beta：实验性自由线程模式和 JIT、改进交互式解释器
Stack Overflow 拿我的代码去训练 AI 大模型，还封了我的账号
Pop!_OS 的 COSMIC 桌面完成 App Store 上架工作
报告：Django 仍然是 74% 开发者的首选
《2024 年一季度互联网投融资运行情况》研究报告
15 年前上了“FFmpeg 耻辱柱”，今天他还得谢谢咱——腾讯QQPlayer一雪前耻？
TIOBE 5 月榜单：Fortran “复活”进入 Top 10
GCC 14.1 发布
周排行
curl的POST请求，封装方法
8.1.1. Integer Types
Java基础 Day05(个人复习整理)
Python - Django - 中间件 process_exception
小L的试卷
【Shell编程】 （函数）判断用户是否存在
python(css样式)
spring ant path 匹配原则 - 【笔记】
《JavaScript与JScript从入门到精通》(美)James.Jaworski.中译本.扫描版.pdf
Eclipse运行带参数的java程序
每日归档
更多
2024-05-12(0)
2024-05-11(38)
2024-05-10(38)
2024-05-09(35)
2024-05-08(42)
2024-05-07(14)
2024-05-06(40)
2024-05-05(0)
2024-05-04(7)
2024-05-03(19)

代码天地 © 2018 codetd.com

境外服务器   最新电视剧2022