Global settings (Global Settings)
C .......... Designed to open or close the screen display mode further format.
D .......... To open or close the current layer has the highest priority right of the display.
The DO .......... Closable opening vias current display mode.
ET .......... When set to pause trace test points to end the way.
I .......... Database integrity test.
L <n> .......... Change the current layer, e.g., the current layer is a second layer of
N <s> .......... Highlight a network
O <r> .......... The pads and traces its frame in the form of display.
PO .......... The copper pour show only their outline.
Q .......... Open the quick measuring device to measure the current position.
QL .......... The lighting networks, and the alignment pins on the choice of a quick measurement of the lengths.
R <n> .......... Set minimum display width, a display in which only the line smaller than this value, for example.
RV .......... Repeatability remains established using circuit mode.
A SPD .......... Segmented displays the generated mixed data layer.
......... the SPI. Display Flag thermal pad symbol "" on which the hot plate.
An SPO .......... Show outline only the mixed layer is split.
T .......... Setting screen designed to display the transparent mode.
X .......... Turns text display frame.
W <n> ......... change width, such as 30.
Grids (Grids)
G <xx> ......... vias and setting the design grid.
GD <xx> ......... raster display settings.
......... open or close the GP polar grid.
GP ra ......... moved to a specified polar coordinate points.
GPR r ......... angle under certain conditions, move a specified radius of the radial point.
GPA a radially under certain conditions the radius, moving according to a specified angle.
GPRA da ......... radially under certain conditions the radius, moving according to the current angle.
GPRR dr ......... angle under certain conditions, according to the current radius radial movement.
GR <xx> ......... set the design grid.
GV <xx> ......... hole provided through the grid.
Search (Search)
S <s> ......... search element or pin element.
S <n> <n> ......... search for an absolute coordinate point, such as 15,001,200.
SR <n> <n> ......... searches a relative coordinate point.
SRX <n> ......... remains constant current coordinate, a relative coordinate point search.
SRY <n> ......... remains constant current coordinate, a relative coordinate point search.
SS <s> ......... search or select a certain category or a non-member, because this command supports wildcard "."
SX <n> ......... current coordinates remains unchanged, a move to an absolute coordinate point specified.
SY <n> ......... current coordinates remains unchanged, a move to an absolute coordinate point specified.
Search for or select the SP ......... segment surfaces are not to use the pixel line width.
Angle (Angles)
AA ......... mode conversion to an arbitrary angle.
......... the AD conversion mode to the miter.
AO ......... the rectangular mode conversion.
Cancel (Undo)
UN [<n>] ......... cancel the operation times, because it is variable.
RE [<n>] ......... operation is repeated a plurality of times.
Design rule checking DRC (Design Rules Checking)
DRP ......... ban violates design rules.
DRW ......... contrary to warning mode.
DRI ......... ignore design rules.
DRO ......... completely closed design rules.
Traces (Routing)
E ......... to end without pause through the hole traces.
Before using the LD ......... layer traces a straight or levels.
PL <n> <n> ......... lock the current operating coatings.
SH ......... pushed open or closed mode.
V <name> ......... select the current type using vias.
VA ......... via automatic selection.
VP ......... holes or blind holes using buried vias.
......... using the VT through hole vias.
T ......... transparent mode.
Drawing objects (Drafting Objects)
......... the HC mode for drawing a circular pattern.
HH ......... for drawing a pattern of non-closed mode.
The HP ......... polygon for drawing a graphics mode.
......... the HR mode for drawing a rectangular pattern.
Alternative-click (Mouse Click Substitutes)
M ......... activate the pop-up menu in the current function mode, equivalent to clicking the right mouse button.
Spacebar ......... equivalent to the current crosshairs position, click the left mouse button, such as adding trace corner.
Other aspects (Various)
? ......... Displays the current Help topic.
BMW ......... open the dialog window.
BLT ......... dialog window opens.
F <s> ......... open the file, open the file path and name.
