Click the Routing icon in the General toolbar 
to bring up the Routing toolbar
From left to right, they are Routing, Fanout, Optimization, Alignment, and Centering.
Routing: The routing command will perform interactive automatic routing design on the selected objects
Fan-out: Automatically perform fan-out routing for the selected SMT components, single pins or networks, and analyze the routing according to the set rules
Optimization: optimize and adjust the selected implementation, such as optimizing the current wiring status and eliminating unnecessary
The necessary Stub (branch) line segment, optimize the usage of Via and shorten the wiring length
Adjustment: The length of the wiring can be automatically improved to the required set length, that is, the automatic winding is equal in length
Centering: Automatically correct the relative distance between the line segments between the pads according to the set design rules
1. Routing: Select the network to be automatically routed, as shown in Figure 1. Right-click the [Wiring] option, and the completed result is shown in Figure 2.
figure 1
figure 2
2. Fan-out: Fan-out the BGA package. After the rules are set, select the device and right-click [Fan-Out], as shown in Figure 3 and Figure 4
image 3
Figure 4
3. Adjustment: Select the network that has set equal length rules and has been routed, right-click [Adjust], as shown in Figure 5, and complete as shown in Figure 6.
Figure 5
Figure 6
4. Center: Select the network that needs to be corrected in the middle of the two pads, and click the right button [Center], as shown in Figure 7
Figure 7
Figure 8
Disclaimer: This article is an original article by Fanyi Education, please indicate the source for reprinting!