------------------- Update 2020 March 3 ------------------------ -----
after the master correction can also be set in the burp is not how to intercept the package. In the option page under the proxy in
By the domain name, ip address as the matching characteristics, and the like can also select the match.
The following is the text ---------------------------- ------------------- -----------
during the course of safety tests, it is often necessary to capture site, change bag, forwarding and other processes.
When I capture ideas during the past, is set:
First, open burp, set the proxy listen address, the default is 127.0.0.1:8080
Second, set the browser's proxy, 127.0.0.1: 8080
Third, confirm the interception on / Close
but this has a downside is that I often do the experiment again, while taking notes in csdn, or find information. During the experiment, frequently encountered problems csdn not upload screenshots, look carefully at the data packet is found to burp it blocked. My needs are only required to intercept packets between burp and drones, and other sites do not intercept data packets, so I used the plug-in --SwitchyOmega of a chrome.
Download
Once downloaded SwitchyOmega, first configure proxy address, of course, is where 127.0.0.1:8080
then set switch rule (filter rules), add drone address
the address selection proxy connection, and a direct connection by default.
Open Mode Select auto switch, so that you can without affecting other sites, happily drones to intercept the packet!
