installation:
① Open VMware, click Create a new virtual machine
② custom following interface selection, the next step
③ direct the next step
④ select the installation disc image file, choose your own browser to download the image file
The next step
⑤ personalized settings set free, pay attention passwords to remember, the next step
⑥ virtual machine name and location of the custom installation to the next step
⑦ the default, the next step
⑧ proposed transfer memory of 2GB, the superior performance of the computer may be appropriate to improve, the next step
⑨ the default, the next step
⑩ the default, the next step
⑾ the default, the next step
⑿ the default, the next step
⒀ default configuration, the next step
⒁ the default, the next step
After ⒂ uncheck open the secondary virtual machine is created, the next step
Click to open the virtual machine ⒃
⒄ part of the computer will appear the following prompt
⒅ resolved as follows
Computer reboot into BIOS, find the Intel Virtualization Technology Enter key instead
Enable, save and exit restart.
VMware ⒆ open again, found just installed virtual machine, click the virtual machine is turned on
As the interface card is set as required
Off the virtual machine, open the "Edit virtual machine settings", the following operation of FIG complete set
Once again open the virtual machine
Following installation screen appears after clicking ⒇ open this virtual machine
(60 sec skip check may be installed directly check)
Start the installation, you can choose to install Chinese language
Click on the installation destination, click the Done button to go after
Set the network and host name
start installation
Configure the root password and user-created
After entering automatically restart the virtual machine as a default interface may also be direct access to five seconds
(The first to enter the default)
agreement
The following interface install has finished
(21) Click on the map "is not listed?" To the root account and password to access the system desktop and make the following settings
(22) to set the time, the command button to open the desktop click activity input terminal in FIG.
Add the following two lines of code to open the configuration file, save and exit
Restart Service
Time Synchronization
View time (if not display properly restart the next computer)
After restarting the computer screen displays the correct time, it looks much cleaner
至此，CentOS8安装完成。