ikuai usage scenarios for an own Baidu. . .
The document physical condition
Memory: 4G
vmware：15.0 pro
Network: Bridging
50G hard disk
Mirror: The latest version of the iso
When I appeared a little allocate memory for any installation anomaly, as follows:
So I'll virtual machine memory upgrade to 4G, it is restarted, as follows:
Input 1, and then input y, shows a system hit sda tray ikuai
Input 2, the setting is LAN / WAN address (set by default NIC setting binding)
Because I am a local area network, where I chose to 0, my network is indeed paragraph 1, so I entered above is 1.133 / 24, q quit
WEB port is set to 81
ping test here is not tested, skip ...
Enter 0 of firewall rules clear ...
Browser access http://192.168.1.133:81/
Official default account password is admin / admin, the lower right corner as shown below
After successfully logging in the way, as follows:
Dynamic monitoring section schematic:
The system provided a schematic section:
Plate a schematic network setup:
Split a schematic flow control plate:
AC Management schematic section:
Authentication accounting schematically plate;
Behavior control section schematically:
Security Settings section schematic:
Advanced Applications section schematic:
Utility schematic section:
I believe after reading the above configuration screen in front of you should know how to set up, if you know linux, ok these difficulties will not become ~~
Good Luck～～
Welcome to the QQ group together to discuss Linux, open source technology
