centos7 RAID disk array card driver installation graphic tutorials

solution

The program can support CentOS 7 version

UEFI mode

Select "the Install the CentOS  the Linux  . 7", and then press the "e" key.

Select Add "linux dd", then press "Ctrl + x" to start.

Enters the following.

Virtual drive eject system image, according to the actual configuration server, into the drive ISO, below enter "r" Enter refresh, then enter "1" carriage return, the mirror can be seen mounted drive, input "1" Enter Select Driver , then enter "c" enter to load the driver.

Eject drive mirror virtual drive, inserted CentOS7 system ISO, below enter "r" Enter refresh, then input "c" Enter.

Referring UEFI mode, the operating system continues the subsequent operation of the installation.

Legacy mode

Below Select "Install CentOS Linux7", then press the "Tab" key to add linuxdd.

FIG into the following interface.

Virtual drive eject system image, according to the actual configuration server, into the drive ISO, below enter "r" Enter refresh, then enter "1" carriage return, the mirror can be seen mounted drive, input "1" Enter Select Driver , then enter "c" enter to load the driver.

Virtual drive eject system image, according to the actual configuration server, into the drive ISO, below enter "r" Enter refresh, then enter "1" carriage return, the mirror can be seen mounted drive, input "1" Enter Select Driver , then enter "c" enter to load the driver.

Referring Legacy mode, the operating system continues the subsequent operation of the installation.

Original from: https://idc.wanyunshuju.com/huawei/762.html