Install citrix xenserver 7.1.0 system

1, enter the installation interface, as shown below:

2. Select - Select the default keyboard mode - American, ok, as shown below:

3, to remind you to install the system clears disk information, make a backup, click ok, as shown below FIG:

4, Pick Accept EULA, as shown below:

5, installed on the local hard drive selection, selecting the first item, click ok, as shown below:

6, the mounting disc media selection local local media, the first click ok, as shown below:

7, Pick skip verification, skipping detecting installation media, click OK, and as shown below:

8, set a password, the login password input XenServer, is the root password, as shown in FIG. :

9, select card (NIC because I 4, I chose eth0), click OK, and as shown below:

10, defines the network management IP address, I here to choose to manually configure the IP address, IP, mask, gateway click ok, as shown below:

11, enter a custom Hostname (computer name), fill in the DNS Server1 address, as shown below:

12 Region select Asia (Asia), as shown below

13, time zone selection Shanghai, as shown below:

14, time set mode, select Manual timeenty (manual time entry), Click OK, and as shown below:

15, after completion of all the settings, start the installation, select Install XenServer, knock back vehicle, as shown below:

16 to begin the installation XenServer interface, as shown below:

17, nO selection, not to install help document, as shown below:

18, fast installation is complete, the following window, fill the current the correct date and time, click OK, and as shown below:

19, the interface has been installed, automatically restart after Click OK, and as shown below:

20, the restart, as shown below:

21 is, the XenServer 7.1 to successfully complete the installation of the system, as shown below:

completion has been installed, it is desirable you can help