Toss will install the system software is the starting point and security, you can remove the worries, rest assured that bold to play (note back up important data). This would introduce a system U disk to start production software: Rufus. Only about the size of 1M, full-featured, simple interface, fast write speed, good compatibility. Despite the small size, Rufus still providing everything you need!
Rufus is a utility that helps to format and create a bootable U disk. You can directly downloaded ISO image (Windows, Linux, UEFI, etc.) write U disk and made into a bootable USB startup disk, very easy to use. The official also provides free installation green version, it has passed Microsoft signature, very easy to use, with a look.
In addition Rufus create fast. For example, when the ISO is created from the Windows 7 U disk drive is installed, its speed is about UNetbootin, Universal USB Installer or Windows 7 USB twice the download tool. Creating a bootable Linux USB device from the ISO, they also faster.
Rufus ISO supported a partial list:
The first step. Preparation Tool
To make the system installation disk, the first step is to download the corresponding system ISO image file. This is not to say, can be found through the official website or third-party vendors download site. Next is to open Rufus official website ( http://rufus.ie ), pull down the page to find the link inside two, which "Rufus 3.8 (1.1MB)" is a link to download the installation version, "Rufus 3.8 Portable (1.1MB) "it is a green version of the download link, which like which point on the line.
The second step. U disk made bootable
After completion of the above work preparation, we can officially started production of the disk, follow these steps:
1. The prepared U disk into the computer, or more generally to 8GB. Back up files on the U disk, because the next operation will clear the entire U disk;
2. Double-click Rufus, the software automatically detects the U disk, you have to do is to make sure the list of U disk is correct;
Make sure to display the list of U disk correctly, pay attention to backup data in advance
3. Click the "image file Select" "Select" button on the right, and then navigate to the downloaded ISO image good;
4. Other options does not matter, but if you want to install computers older (over 6 years), it is recommended to modify the partition type to "MBR", so as not plugged into the target computer can not be identified. After everything is correct, click "Start" can be made;
The remaining options remain the default, but the old computer is recommended partition type is set to "MBR"
5. Next U disk format is ISO and the process of copying, of course, is automatic, depending on the speed of your computer and the quality of their own U-disk. Nothing to say here, patiently wait for a while like;
making……
6. Final Rufus will pop up a message box to see it on behalf of the production is complete.
Step Installing System
U disk to do, it can be used to install the system. And the regular installation as U disk into the computer, restart and boot from the U disk, the computer will automatically enter the system later in the installation interface, the whole process at one go, very easy to use!
Automatic installation interface
Written in the last
Overall, Rufus very conscience. It is open source, free, clean, no equipment required, will not pop up all kinds of annoying little tips, and even green version also passed Microsoft certification. All options remain intact, to complete the boot disk created.