vmware installation kali linux system to the U disk boot error (initramfs :) repair method

This article was adapted from https://www.cnblogs.com/xuandi/p/6746880.html

Installation kalilinux this error occurs after the U disk boot:

This is the grub wrong path.

Solution:

In this mode you can enter the command: blkid see listed include disk find your U-disk systems under TYPE = "ext4" zone remember / dev / sdc1 name. (Everyone is different and some may be sdb1 below with sdc1).

 

Then restart to.

Kalilinux to the start screen:

The keyboard 'e' key to enter editing mode:

Find the "ramdisk ...." on the place to find the back row of linux have there ............. / dev / sda1 ro place into / dev / sdc1 rw, ro press F10 to reboot into rw start.

 

If the above is correct operation can successfully enter the system. Username: root Password: When you install the set.

 

Entered kalilinux was successful 99%, finishing the next 1%.

 

But above this setting method is only temporary modification every time.

Permanent methods of operation:

After entering the open system terminals.

/ Input

# Grub-install / dev / sdc # grub to install to your u disk, a disk is not the main area behind sdc U not digital

# Update-grub # update under grub.cfg

#cat /boot/mnt/grub.cfg # If this step fails, do not be too concerned can manually cut into the lower boot to the CD go to use cat grub.cfg view the contents to see if mounted under linux / boot / grud / directory sdc1 (everyone is different) next. (Shown here may not be possible sdc1 sdc1 the UUID command can be used blkid look.)

Be sure to write #sync #

#reboot  #重启系统 应该是没问题了。

 

至此解决。

 

如有问题联系QQ：1930932008