Prometheus + Node_exporter + Grafana + Alertmanager monitoring deployment

Enterprise 2019-11-12 00:44:51 views: null

A, Prometheus installation and configuration

1. Download and extract the installation package

cd /usr/local/src/

export VER="2.13.1"
wget https://github.com/prometheus/prometheus/releases/download/v${VER}/prometheus-${VER}.linux-amd64.tar.gz

mkdir -p /data0/prometheus 
groupadd prometheus
useradd -g prometheus prometheus -d /data0/prometheus

tar -xvf prometheus-${VER}.linux-amd64.tar.gz
cd /usr/local/src/
mv prometheus-${VER}.linux-amd64 /data0/prometheus/prometheus_server

cd /data0/prometheus/prometheus_server/
mkdir -p {data,config,logs,bin} 
mv prometheus promtool bin/
mv prometheus.yml config/

chown -R prometheus.prometheus /data0/prometheus

2, set the environment variable

vim /etc/profile

PATH=/data0/prometheus/prometheus_server/bin:$PATH:$HOME/bin

source /etc/profile

3, check the configuration file

promtool check config /data0/prometheus/prometheus_server/config/prometheus.yml

Checking /data0/prometheus/prometheus_server/config/prometheus.yml
  SUCCESS: 0 rule files found

4, the systemd unit files created prometheus.service


#命令行测试机器人发送消息，验证是否可以发送成功，有的时候prometheus-webhook-dingtalk会报422的错误，就是因为钉钉的安全限制(这里的安全策略是发送消息，必须包含prometheus才可以正常发送)
curl -H "Content-Type: application/json" -d '{"msgtype":"text","text":{"content":"prometheus alert test"}}' https://oapi.dingtalk.com/robot/send?access_token=18f977769d50518e9d4f99a0d5dc1376f05615b61ea3639a87f106459f75b5c9

curl -H "Content-Type: application/json" -d '{"msgtype":"text","text":{"content":"prometheus alert test"}}' https://oapi.dingtalk.com/robot/send?access_token=11a0496d0af689d56a5861ae34dc47d9f1607aee6f342747442cc83e36715223

4.1, regular service

sudo tee /etc/systemd/system/prometheus.service <<-'EOF'
[Unit]
Description=Prometheus
Documentation=https://prometheus.io/
After=network.target

[Service]
Type=simple
User=prometheus
ExecStart=/data0/prometheus/prometheus_server/bin/prometheus --config.file=/data0/prometheus/prometheus_server/config/prometheus.yml --storage.tsdb.path=/data0/prometheus/prometheus_server/data --storage.tsdb.retention=60d
Restart=on-failure

[Install]
WantedBy=multi-user.target
EOF

systemctl enable prometheus.service
systemctl stop prometheus.service
systemctl restart prometheus.service
systemctl status prometheus.service

4.2, using the supervisor management prometheus_server

yum install -y epel-release supervisor

sudo tee /etc/supervisord.d/prometheus.ini<<-"EOF"
[program:prometheus]
# 启动程序的命令;
command = /data0/prometheus/prometheus_server/bin/prometheus --config.file=/data0/prometheus/prometheus_server/config/prometheus.yml --storage.tsdb.path=/data0/prometheus/prometheus_server/data --storage.tsdb.retention=60d
# 在supervisord启动的时候也自动启动;
autostart = true
# 程序异常退出后自动重启;
autorestart = true
# 启动5秒后没有异常退出，就当作已经正常启动了;
startsecs = 5
# 启动失败自动重试次数，默认是3;
startretries = 3
# 启动程序的用户;
user = prometheus
# 把stderr重定向到stdout，默认false;
redirect_stderr = true
# 标准日志输出;
stdout_logfile=/data0/prometheus/prometheus_server/logs/out-prometheus.log
# 错误日志输出;
stderr_logfile=/data0/prometheus/prometheus_server/logs/err-prometheus.log
# 标准日志文件大小，默认50MB;
stdout_logfile_maxbytes = 20MB
# 标准日志文件备份数;
stdout_logfile_backups = 20
EOF

systemctl daemon-reload
systemctl enable supervisord
systemctl stop supervisord
systemctl restart supervisord
supervisorctl restart prometheus
supervisorctl status

5, prometheus.yml profile

#创建Alertmanager告警规则文件
mkdir -p /data0/prometheus/prometheus_server/rules/
touch /data0/prometheus/prometheus_server/rules/node_down.yml
touch /data0/prometheus/prometheus_server/rules/memory_over.yml
touch /data0/prometheus/prometheus_server/rules/disk_over.yml
touch /data0/prometheus/prometheus_server/rules/cpu_over.yml

#prometheus配置文件
cat > /data0/prometheus/prometheus_server/config/prometheus.yml << \EOF
# my global config
global:
  scrape_interval: 15s # 设置抓取(pull)时间间隔，默认是1m
  evaluation_interval: 15s # 设置rules评估时间间隔，默认是1m
  # scrape_timeout is set to the global default (10s).

# 告警管理配置，默认配置
alerting:
  alertmanagers:
  - static_configs:
    - targets:
      - 192.168.56.11:9093 # 这里修改为 alertmanagers 的地址

# 加载rules，并根据设置的时间间隔定期评估
rule_files:
# - "first_rules.yml"
# - "second_rules.yml"
  - "/data0/prometheus/prometheus_server/rules/node_down.yml"                 # 实例存活报警规则文件
  - "/data0/prometheus/prometheus_server/rules/memory_over.yml"               # 内存报警规则文件
  - "/data0/prometheus/prometheus_server/rules/disk_over.yml"                 # 磁盘报警规则文件
  - "/data0/prometheus/prometheus_server/rules/cpu_over.yml"                  # cpu报警规则文件

# 抓取(pull)，即监控目标配置
# 默认只有主机本身的监控配置
scrape_configs:
  # The job name is added as a label `job=<job_name>` to any timeseries scraped from this config.
  - job_name: 'prometheus'

    # metrics_path defaults to '/metrics'
    # scheme defaults to 'http'.

    # 可覆盖全局配置设置的抓取间隔，由15秒重写成5秒。
    scrape_interval: 10s

    static_configs:
      - targets: ['localhost:9090', 'localhost:9100']

  - job_name: 'DMC_HOST'
    file_sd_configs:
      - files: ['./hosts.json']  
      # 被监控的主机，可以通过static_configs罗列所有机器，这里通过file_sd_configs参数加载文件的形式读取
      # 被监控的主机，可以json或yaml格式书写，我这里以json格式书写，target里面写监控机器的ip，labels非必须，可以由你自己定
EOF

#file_sd_configs参数形式配置主机列表
cat > /data0/prometheus/prometheus_server/config/hosts.json << \EOF
[
{
"targets": [
  "192.168.56.11:9100",
  "192.168.56.12:9100",
  "192.168.56.13:9100"
],
"labels": {
    "service": "db_node"
    }
},
{
"targets": [
  "192.168.56.14:9100",
  "192.168.56.15:9100",
  "192.168.56.16:9100"
],
"labels": {
    "service": "web_node"
    }
}
]
EOF

# 服务器存活报警
cat > /data0/prometheus/prometheus_server/rules/node_down.yml <<\EOF
groups:
- name: 实例存活告警规则
  rules:
  - alert: 实例存活告警
    expr: up == 0
    for: 1m
    labels:
      user: prometheus
      severity: warning
    annotations:
      description: "{{ $labels.instance }} of job {{ $labels.job }} has been down for more than 1 minutes."
EOF

# mem报警
cat > /data0/prometheus/prometheus_server/rules/memory_over.yml <<\EOF
groups:
- name: 内存报警规则
  rules:
  - alert: 内存使用率告警
    expr: (node_memory_MemTotal_bytes - (node_memory_MemFree_bytes+node_memory_Buffers_bytes+node_memory_Cached_bytes )) / node_memory_MemTotal_bytes * 100 > 80
    for: 1m
    labels:
      user: prometheus
      severity: warning
    annotations:
      description: "服务器: 内存使用超过80%！(当前值: {{ $value }}%)"
EOF

# disk报警
cat > /data0/prometheus/prometheus_server/rules/disk_over.yml <<\EOF
groups:
- name: 磁盘报警规则
  rules:
  - alert: 磁盘使用率告警
    expr: (node_filesystem_size_bytes - node_filesystem_avail_bytes) / node_filesystem_size_bytes * 100 > 80
    for: 1m
    labels:
      user: prometheus
      severity: warning
    annotations:
      description: "服务器: 磁盘设备: 使用超过80%！(挂载点: {{ $labels.mountpoint }} 当前值: {{ $value }}%)"
EOF

# cpu报警
cat > /data0/prometheus/prometheus_server/rules/cpu_over.yml <<\EOF
groups:
- name: CPU报警规则
  rules:
  - alert: CPU使用率告警
    expr: 100 - (avg by (instance)(irate(node_cpu_seconds_total{mode="idle"}[1m]) )) * 100 > 90
    for: 1m
    labels:
      user: prometheus
      severity: warning
    annotations:
      description: "服务器: CPU使用超过90%！(当前值: {{ $value }}%)"
EOF

6, see the UI

Prometheus comes with simple UI

http://192.168.56.11:9090/

http://192.168.56.11:9090/targets
http://192.168.56.11:9090/graph

Two, node_exporter installation and configuration

1. Download and extract the installation package

cd /usr/local/src/

export VER="0.18.1"
wget https://github.com/prometheus/node_exporter/releases/download/v${VER}/node_exporter-${VER}.linux-amd64.tar.gz

mkdir -p /data0/prometheus 
groupadd prometheus
useradd -g prometheus prometheus -d /data0/prometheus

tar -xvf node_exporter-${VER}.linux-amd64.tar.gz
cd /usr/local/src/
mv node_exporter-${VER}.linux-amd64 /data0/prometheus/node_exporter

chown -R prometheus.prometheus /data0/prometheus

2, the systemd unit files created node_exporter.service

  • Create a service under centos
cat > /usr/lib/systemd/system/node_exporter.service <<EOF
[Unit]
Description=node_exporter
Documentation=https://prometheus.io/
After=network.target

[Service]
Type=simple
User=prometheus
ExecStart=/data0/prometheus/node_exporter/node_exporter
Restart=on-failure

[Install]
WantedBy=multi-user.target
EOF
  • Create a service under ubuntu
cat > /etc/systemd/system/node_exporter.service <<EOF
[Unit]
Description=node_exporter
Documentation=https://prometheus.io/
After=network.target

[Service]
Type=simple
User=prometheus
ExecStart=/data0/prometheus/node_exporter/node_exporter
Restart=on-failure

[Install]
WantedBy=multi-user.target
EOF

3, start the service

systemctl daemon-reload
systemctl stop node_exporter.service
systemctl enable node_exporter.service
systemctl restart node_exporter.service

4, operating status

systemctl status node_exporter.service

5, client-side data monitoring report

Access: http://192.168.56.11:9100/metrics View from the exporter can catch specific data.

Third, the deployment Alertmanager nail alarm

1. Download and extract the installation package

cd /usr/local/src/

export VER="0.19.0"
wget https://github.com/prometheus/alertmanager/releases/download/v${VER}/alertmanager-${VER}.linux-amd64.tar.gz

mkdir -p /data0/prometheus 
groupadd prometheus
useradd -g prometheus prometheus -d /data0/prometheus

tar -xvf alertmanager-${VER}.linux-amd64.tar.gz
cd /usr/local/src/
mv alertmanager-${VER}.linux-amd64 /data0/prometheus/alertmanager

chown -R prometheus.prometheus /data0/prometheus

2, the configuration Alertmanager

alertmanager of webhook integrated alarm nails, nail robot has strict requirements for file formats, it is necessary to send to your nails robot through a specific format conversion. T was already caring for everyone to write a converter plug-in, then we will be directly used to use it!

( https://github.com/timonwong/prometheus-webhook-dingtalk.git )

cat >/data0/prometheus/alertmanager/alertmanager.yml<<-"EOF"
# 全局配置项
global:
  resolve_timeout: 5m # 处理超时时间，默认为5min

# 定义路由树信息
route:
  group_by: [alertname]  # 报警分组依据
  receiver: ops_notify   # 设置默认接收人
  group_wait: 30s        # 最初即第一次等待多久时间发送一组警报的通知
  group_interval: 60s    # 在发送新警报前的等待时间
  repeat_interval: 1h    # 重复发送告警时间。默认1h
  routes:

  - receiver: ops_notify  # 基础告警通知
    group_wait: 10s
    match_re:
      alertname: 实例存活告警|磁盘使用率告警   # 匹配告警规则中的名称发送

  - receiver: info_notify  # 消息告警通知
    group_wait: 10s
    match_re:
      alertname: 内存使用率告警|CPU使用率告警

# 定义基础告警接收者
receivers:
- name: ops_notify
  webhook_configs:
  - url: http://localhost:8060/dingtalk/ops_dingding/send 
    send_resolved: true  # 警报被解决之后是否通知

# 定义消息告警接收者
- name: info_notify
  webhook_configs:
  - url: http://localhost:8060/dingtalk/info_dingding/send 
    send_resolved: true

# 一个inhibition规则是在与另一组匹配器匹配的警报存在的条件下，使匹配一组匹配器的警报失效的规则。两个警报必须具有一组相同的标签。
inhibit_rules: 
  - source_match: 
      severity: 'critical' 
    target_match: 
      severity: 'warning' 
    equal: ['alertname', 'dev', 'instance']
EOF

3, start Alertmanager

cat >/lib/systemd/system/alertmanager.service<<\EOF
[Unit]
Description=Prometheus: the alerting system
Documentation=http://prometheus.io/docs/
After=prometheus.service

[Service]
ExecStart=/data0/prometheus/alertmanager/alertmanager --config.file=/data0/prometheus/alertmanager/alertmanager.yml
Restart=always
StartLimitInterval=0
RestartSec=10

[Install]
WantedBy=multi-user.target
EOF

systemctl enable alertmanager.service
systemctl stop alertmanager.service
systemctl restart alertmanager.service
systemctl status alertmanager.service

#查看端口
netstat -anpt | grep 9093

4, the nail access Prometheus AlertManager WebHook

#命令行测试机器人发送消息，验证是否可以发送成功，有的时候prometheus-webhook-dingtalk会报422的错误，就是因为钉钉的安全限制(这里的安全策略是发送消息，必须包含prometheus才可以正常发送)
curl -H "Content-Type: application/json" -d '{"msgtype":"text","text":{"content":"prometheus alert test"}}' https://oapi.dingtalk.com/robot/send?access_token=18f977769d50518e9d4f99a0d5dc1376f05615b61ea3639a87f106459f75b5c9

curl -H "Content-Type: application/json" -d '{"msgtype":"text","text":{"content":"prometheus alert test"}}' https://oapi.dingtalk.com/robot/send?access_token=11a0496d0af689d56a5861ae34dc47d9f1607aee6f342747442cc83e36715223

4.1 binary packages are deployed plug-ins

cd /usr/local/src/
export VER="0.3.0"
wget https://github.com/timonwong/prometheus-webhook-dingtalk/releases/download/v${VER}/prometheus-webhook-dingtalk-${VER}.linux-amd64.tar.gz
tar -zxvf prometheus-webhook-dingtalk-${VER}.linux-amd64.tar.gz
mv prometheus-webhook-dingtalk-${VER}.linux-amd64 /data0/prometheus/alertmanager/prometheus-webhook-dingtalk

#使用方法：prometheus-webhook-dingtalk --ding.profile=钉钉接收群组的值=webhook的值

cat > /etc/systemd/system/prometheus-webhook-dingtalk.service<<\EOF
[Unit]
Description=prometheus-webhook-dingtalk
After=network-online.target

[Service]
Restart=on-failure
ExecStart=/data0/prometheus/alertmanager/prometheus-webhook-dingtalk/prometheus-webhook-dingtalk \
          --ding.profile=ops_dingding=https://oapi.dingtalk.com/robot/send?access_token=18f977769d50518e9d4f99a0d5dc1376f05615b61ea3639a87f106459f75b5c9 \
          --ding.profile=info_dingding=https://oapi.dingtalk.com/robot/send?access_token=11a0496d0af689d56a5861ae34dc47d9f1607aee6f342747442cc83e36715223          

[Install]
WantedBy=multi-user.target
EOF

systemctl daemon-reload
systemctl stop prometheus-webhook-dingtalk
systemctl restart prometheus-webhook-dingtalk
systemctl status prometheus-webhook-dingtalk

netstat -nltup|grep 8060

4.2, docker deploy plug-ins

docker pull timonwong/prometheus-webhook-dingtalk:v0.3.0

#docker run -d --restart always -p 8060:8060 timonwong/prometheus-webhook-dingtalk:v0.3.0 --ding.profile="<web-hook-name>=<dingtalk-webhook>"

docker run -d --restart always -p 8060:8060 timonwong/prometheus-webhook-dingtalk:v0.3.0 --ding.profile="ops_dingding=https://oapi.dingtalk.com/robot/send?access_token=18f977769d50518e9d4f99a0d5dc1376f05615b61ea3639a87f106459f75b5c9" --ding.profile="info_dingding=https://oapi.dingtalk.com/robot/send?access_token=11a0496d0af689d56a5861ae34dc47d9f1607aee6f342747442cc83e36715223"

这里解释一下两个变量：

<web-hook-name> ：prometheus-webhook-dingtalk 支持多个钉钉 webhook，不同 webhook 就是靠名字对应到 URL 来做映射的。要支持多个钉钉 webhook，可以用多个 --ding.profile 参数的方式支持，例如：sudo docker run -d --restart always -p 8060:8060 timonwong/prometheus-webhook-dingtalk:v0.3.0 --ding.profile="webhook1=https://oapi.dingtalk.com/robot/send?access_token=token1" --ding.profile="webhook2=https://oapi.dingtalk.com/robot/send?access_token=token2"。而名字和 URL 的对应规则如下，ding.profile="webhook1=......"，对应的 API URL 为：http://localhost:8060/dingtalk/webhook1/send

<dingtalk-webhook>：这个就是之前获取的钉钉 webhook

4.3 Source deploy plug-ins

#安装golang环境
cd /usr/local/src/
wget https://dl.google.com/go/go1.13.4.linux-amd64.tar.gz
tar -zxvf go1.13.4.linux-amd64.tar.gz
mv go/ /usr/local/

#vim /etc/profile
export GOROOT=/usr/local/go
export PATH=$PATH:$GOROOT/bin

#添加环境变量GOPATH
mkdir -p /opt/path
export GOPATH=/opt/path

#若 $GOPATH/bin 没有加入$PATH中，你需要执行将其可执行文件移动到$GOBIN下
export GOPATH=/opt/path
export PATH=$PATH:$GOROOT/bin:$GOPATH/bin
source /etc/profile

#下载插件
cd /usr/local/src/
git clone https://github.com/timonwong/prometheus-webhook-dingtalk.git
cd prometheus-webhook-dingtalk
go get github.com/timonwong/prometheus-webhook-dingtalk/cmd/prometheus-webhook-dingtalk
make   #(make成功后，会产生一个prometheus-webhook-dingtalk二进制文件)

#将钉钉告警插件拷贝到alertmanager目录
cp prometheus-webhook-dingtalk /data0/prometheus/alertmanager/

#启动服务
nohup /data0/prometheus/alertmanager/prometheus-webhook-dingtalk/prometheus-webhook-dingtalk --ding.profile="ops_dingding=https://oapi.dingtalk.com/robot/send?access_token=18f977769d50518e9d4f99a0d5dc1376f05615b61ea3639a87f106459f75b5c9" --ding.profile="info_dingding=https://oapi.dingtalk.com/robot/send?access_token=11a0496d0af689d56a5861ae34dc47d9f1607aee6f342747442cc83e36715223" 2>&1 1>/tmp/dingding.log &

#检查端口
netstat -anpt | grep 8060

Four, Grafana installation and configuration

1. Download and install

cd /usr/local/src/

export VER="6.4.3"
wget https://dl.grafana.com/oss/release/grafana-${VER}-1.x86_64.rpm
yum localinstall -y grafana-${VER}-1.x86_64.rpm

2, start the service

systemctl daemon-reload
systemctl enable grafana-server.service
systemctl stop grafana-server.service
systemctl restart grafana-server.service

3, access WEB interface

Default account / password: ADMIN / ADMIN http://192.168.56.11:3000

4, Grafana add a data source

在登陆首页，点击"Configuration-Data Sources"按钮，跳转到添加数据源页面，配置如下：
Name: prometheus
Type: prometheus
URL: http://192.168.56.11:9090
Access: Server
取消Default的勾选，其余默认，点击"Add"，如下：

需要安装饼图的插件
grafana-cli plugins install grafana-piechart-panel
systemctl restart grafana-server.service

请确保安装后能正常添加饼图。

安装consul数据源插件
grafana-cli plugins install sbueringer-consul-datasource
systemctl restart grafana-server.service

Fifth, the replacement of dashboards grafana

https://grafana.com/grafana/dashboards/11074 basic monitoring -new

https://grafana.com/dashboards/8919 basic monitoring

https://grafana.com/dashboards/7362 Database Monitoring

Reference documents:

https://www.jianshu.com/p/e59cfd15612e Centos 7 deployment Prometheus, Alertmanager, Grafana monitor Linux host

https://juejin.im/entry/5c2c4a7f6fb9a049b82a90ee use Prometheus monitoring Ceph

https://blog.csdn.net/xiegh2014/article/details/84936174 CentOS7.5 Prometheus2.5 + Grafana5.4 monitoring deployment

https://www.cnblogs.com/smallSevens/p/7805842.html Grafana + Prometheus create a full range stereo monitoring system

https://www.cnblogs.com/sfnz/p/6566951.html mounting prometheus + grafana monitoring the like mysql redis kubernetes

https://blog.csdn.net/hzs33/article/details/86553259 Prometheus + grafana monitoring mysql, canal server

Author: Lancger

github Address: https://github.com/Lancger/opslinux/blob/master/monitor/Prometheus/1.Prometheus%2BNode_exporter%2BGrafana%2BAlertmanager%E7%9B%91%E6%8E%A7%E4%B8%80 % E4% BD% 93% E5 % 8C% 96.md

Guess you like

Origin blog.51cto.com/51reboot/2449530
Recommended
Arc Browser for Windows 1.0 officially GA
A programmer born in the 1990s developed a video porting software and made over 7 million in less than a year. The ending was very punishing!
Ranking
1. Select Sort
Create a thread thread
3 press to play ball that reach 6
Programmation CUDA (4) : gestion de la mémoire
SpringBoot database connection pool Druid error
E Diudiu App redesign summary
4EVERLAND Hosting now supports SNS+IPFS
About HTTPS
[vue3+vite+ts+element-plu+sass] uses bug records in sass
Interpretation of HUAWEI CLOUD GaussDB (for Influx): Best Practice Data Modeling
Daily
More
2024-05-03(8)
2024-05-02(0)
2024-05-01(4)
2024-04-30(36)
2024-04-29(5)
2024-04-28(12)
2024-04-27(29)
2024-04-26(22)
2024-04-25(32)
2024-04-24(30)

Code World

© 2018 codetd.com