I. Case Summary
Regardless of what kind of service in the enterprise backup is a very important part, of course, vSphere virtualization is no exception. This case study describes vsPHERE core components --vsPHERE Data Protection.
Second, the case of pre-knowledge
1. What is the OVF template
OVF template is an open, public, secure virtual machine compression format commonly used is an extension template named .ova, but there is actually no difference. OVF template can operate at multiple major virtualization platforms.
2. What is vSphere Data Protection
vSphere Data Protection referred to as VDP, EMC and Vmware is through technology collaboration launched next-generation disk-based backup and recovery solutions, reliable and easy to deploy, replace the VDR before and VCB; fully integrated with vCenter Server, can be used to backup job execution efficient centralized management, while through the upper eliminate duplicate data of the target stored in the backup storage.
vSphere Data Protection有两个版本,分别是VDP和VDP Advanced,它们之间的区别是,每台应用装置VDP Advanced最多支持400台虚拟机和8TB的存储空间,普通的VDP仅支持最多100台虚拟机和2TB的存储空间,并且VDP Advanced还支持应用程序级复制、在Microsoft Server上能够恢复到粒度级别和针对SQL Server、Exchange Server和SharePoint Server进行来宾级备份和恢复等。特别需要注意的是,VDP Advanced是需要进行许可才能使用的。
Third, the implementation of case
Pre-deployment preparation
In the domain controller in DNS "reverse lookup zone" and "Forward Lookup Zones" manually increase the resolution information VDP server.
Default Next
Adding completed
Forward Lookup Add Host
Navigate to the "vCenter", select "Manage" tab in the "Permissions" tab, click "Add Permissions" button.
Click the "Add" button to add a specific user, select "vcenter.benet.com" field, select the single-user "administrator", then click "Add" button and "OK"
button. Then the user's permission to change roles from "do not have access" to "administrator", click "OK" button.
1, ESXi01 server
ESXi01 server initialization, memory 8GB, 4 processors, network cards VM1, VM2, VM3
2, ESXi02 server
ESXi02 server initialization, add VM1, VM2, VM3 card
3, open AD, SQL, vCenter
4, open openfiler
5, open vClient
Login ESXi01 server
Configuration time
Login ESXi02 server
Configuration time
ESXi01 standard configuration switches
Default Next
Edit the network tab, click Next
Configure the IP address, click Next
The addition is complete, no gateway
Edit Vmotion
Configure a second standard switches
Default Next
Edit the network tab, click Next
Configure the IP address, click Next
Configuration is complete, no gateway
Adding shared storage
Be determined
Editing shared storage
Add dynamic discovery
Check whether to add shared storage success
ESXi02 server adds a standard switch
Default Next
Edit the network tab, check this port group for vMotion, click Next
Configure the IP address, click Next
Configuration is complete, no gateway
Add a second standard switches
Default Next
Edit the network tab, click Next
Configure the IP address
Configuration is complete, no gateway
Connection Sharing Memory
Editing shared storage
Add dynamic discovery
Rescan
Login vCenter
VCenter virtual machine to copy the VDP
Start importing VDP
Click allow click Next
Browse VDP position just copied and click Next
Default Next
Click accepted, the next step
Select the database, click Next
Select the shared storage, click Next
Default Next
Edit Gateway, DNS, IP address and subnet mask, click Next
Click Finish
OVF start initialization
Open vSphere Data Protection
Open Management Console
Browser access
Browser access, enter the password
Default Next
DNS is configured correctly it will automatically identify, by default the next step
Shanghai Asian time zone selection, click Next
Set a password, the password must meet the above requirements
Registration vCenter, test the connection, the connection is successful, click Next
Next default storage
Complete restart it
Reboot is complete
Logout log back vcenter
VDP connection
Creating a backup job
Select Backup Destination
Set the schedule time
Default Next
Editing name
Click Finish
View Mission Control
See if there is an error log
Backup job success
Began to recover
Default Next
Select the recovery position, I chose to return to the second stage ESXi server
Can be completed
View Mission Control
vclient Log ESXi02 server using the client, you will find a newly added virtual machine recovery
Open the virtual machine recovery
Open Management Console
Virtual machines can run properly
Analog accidentally deleted
Just recover accidentally deleted virtual machine
Default Next
Select the location to restore, click Next
carry out
The successful launch of recovery
View Mission Control
The client vclient login ESXi01 server, you will find the virtual machine has been restored back
Export OVF module
Select export directory, select the format, and click Next
Start initialization
Initialization is complete, start the export
------ This concludes the article, thanks for reading ------