1. Run system view
system-view
2. Enable snmp agent
snmp-agent // undo snmp-agent running close snmp agent
Contact Information 3. Configuration Management node
snmp-agent sys-info contact
eg: snmp-agent sys-info contact 4008229999
The physical location of the node configuration management
snmp-agent sys-info location
eg: snmp-agent sys-info location BeiJing China
Configuration version of snmp
snmp-agent sys-info version
eg: snmp-agent sys-info version v2c
4. Configure community name snmp agent of
snmp-agent community read PublicManager community name string, case sensitive, without spaces ranging in length from 8 to 32
5. Enable packet switch to send Trap
snmp-agent trap enable
6. Configure the alarm mode to send Inform mode, secure host name PublicManager, protocol version is v2c, send an alarm to alert the host 172.16.3.1
snmp-agent target-host inform address udp-domain 172.16.3.1 params securityname PublicManager v2c