linux-centos installation diagram IP remote connections and configuration

The installation vm software version 15, the system is centos7.6 (1810)

System installation graphic> IP configuration information networking> wireless network machine is a real state, how virtual machine networking> Remote Tools connect virtual machines

A, vm install centos7.6

1, the cursor to select install CentOS, installing press Enter

2centos7 welcome screen, choose the installation process screen display language, you can choose not familiar with the Chinese

3 Installation Overview Interface

4 Set language and time zone

5 Select the software selection, to install the software set, minimize the server installed with relatively more

6 installation destination select the mounting position, partition

Server partitioning scheme is simple: / boot 1G ---- / ---- all remaining the swap may not be provided, or may be provided 16G 8G

7 can be opened and set the IP network, the system may be set up IP Bahrain

8 set the root password, and add ordinary user

9 system is installed, click on reboot reboot into the system

Second, configure IP networking can make centos

1 First check the system's hardware virtual machine settings are to bridge

2 in the windows to see the real machine by using the ipconfig command cmd gateway and mask

3 Change centos network card configuration file
editing NIC configuration file (different versions may be different from the last file name)

/etc/sysconfig/network-scripts/ifcfg-ens33 

Modify or add the following

ONBOOT="yes"
BOOTPROTO="static"
IPADDR=192.168.31.195
GATEWAY=192.168.31.1
NETMASK=255.255.255.0

My profile below

4 Network Service Restart

service network restart 

5 Test Network

Third, my real machine via Wi-Fi, how to set it

You need to be set to specify the network card in the vm virtual machine
Edit> Virtual Network Editor

It may be determined according to the wireless LAN equipment usb interface or other means

Setting is completed, the method according to the above configuration card configuration, it
or if not, in addition to the above interface can be bridged, the rest are removed

Fourth, to connect to centos system in a virtual machine by remote tools

Use tools: Xshell, putty
Xshell free personal version is recommended to use
putty is completely free to use open source, but can not save the connection information

New IP address connection

Open the IP address of the connection (if connected for the first time, there will confirm to save the information)

1)
enter the account number

enter password