Two routers are enabled by default network address translation, IP address and mac address of the client will have converted to the router's IP and mac. Such behavior from upper management point of view, can only see the IP address of the router. To distinguish between the following two routes terminal, the two must change Router AP mode (i.e. mode wireless switch).
In this article, I'll show you how to make a wireless router work in wireless AP mode.
First, turn off the wireless router's DHCP service.
In the AP mode, DHCP uniform distribution of the primary three switches or routers, we first wireless router DHCP off. Figure:
Second, the wireless router network cable not connected to the WAN port.
Wireless router network address translation in WAN port, so our cable should be connected to the LAN port wireless router. Such a connection, a wireless router such that it becomes a wireless switch, only provides wireless functionality. Figure:
After such rectification, it can manage online behavior in the upper WSG above, to monitor all wireless terminals, and can be set individually for each terminal of Internet strategy.
Repeat steps:
Turn off DHCP services.
LAN cable connected to the port.
Modifying the wireless router LAN port IP (optional)