Today buy Raspberry Pi 3B + to record your own usage.
1, when bought TF card had been burning a good system. Because only a cable, so consider directly connected computer network cable landing ssh. Therefore, empty file ssh in the TF card to create a new directory called boot;
2, first need to open wlan share, in the Change adapter settings option wlan right-click and select Properties, select Sharing, found that the network administrator has disabled the Internet sharing;
3, Run, type regedit, \ HKEY_LOCAL_MACHINE \ SOFTWARE \ Policies \ Microsoft \ Windows \ Network Connections NC_ShowSharedAccessUI with the name of the file, and if not, create a new file REG_QWORD type the file name, and modify its hexadecimal value of 1 ;
4, return to the interface 2, the network sharing set. According to the sub-plate which network port, select:
5, change the selection Ethernet adapter property setting, double-click Internet Protocol Version 4, Use the following IP address -> IP address to 192.168.137.1;
6, Run -> cmd input arp -a, shown below:
Raspberry Pi is obviously 192.168.137.24 address;
7、putty ssh ,userid:pi ; pw:raspberry;
8, ssh, if you run sudo apt-get install xrdp and sudo apt-get install tightvncserver;