kapton HN Series H & H series --HN and having excellent electrical insulation properties, chemical properties, heat cold (-269 ℃ --400 ℃) properties; also has excellent flame resistance and non-spread properties.
DuPont KAPTON® FN polyimide film having a surface coating TEFLON®FEP PI film, mainly used in high temperature wire, insulated cable and ribbon cable, the insulating cloth, and other fields. DuPont PI film type FN type are 120FN616 / 150FN019 / 200FN919 / 250FN029 type. In practice, KAPTON®PI film to be the only film material to meet the requirements of harsh environments and.
APTON® short can withstand extreme temperatures from -269 ℃ to 400 ℃. Material properties under severe temperature stability, can be used for a long time at 230 deg.] C, high dielectric strength.
· KAPTON®PI membrane three times as PI film coefficient of heat dissipation, self-extinguishing and flame retardant ability, only if coked at 800 ℃ high temperature, but not from the fire burning.
· KAPTON® not melt at high temperatures.
· KAPTON® highly chemically inert, insoluble in any organic solvent known.
· KAPTON® has a strong radioprotective capacity.
· In all known film materials, KAPTON® is the only film can withstand corona discharge. (CR especially where the type of film)
KAPTON® polyimide film is synthesized by a polycondensation reaction from an aromatic dianhydride and between an aromatic diamine. The reaction product in crystalline structure, the heat exchanger, the film finally obtained amorphous. Moreover, different production conditions and raw materials, but also can adjust the properties of the final product, to meet different application needs.
kapton CR Series
Kapton ® CR polyimide film is to prevent the partial discharge but specially developed, partial discharge may result in ionization of an insulating material, and loss.
performance
Kapton ® CR polyimide film combined with a Kapton ® excellent characteristics of HN, resistance to surface corona treatment. Using a Kapton ® CR polyimide film significantly improve the insulation resistance system of a high voltage generator or a motor.
application
Rotary motor
Electrically insulating spacer
generator
Traction motor
transformer
Outer conductor and wire insulation
Technical data
Table 1
Typical Properties of Kapton Type 100 CR Polyimide Film, 25 µm (1 mil)
Typical Properties of Kapton Type 150 FCR 019 Polyimide Film, 37.5 µm (1.5 mil)
DuPont Kapton - FCR Series
DuPont Kapton Type: FCR- corona-resistant high performance thin film
Corona-resistant high performance thin film FCR-
Product Overview and Uses
Product can be used for wire insulation and thermal conductor can effectively reduce the possibility of partial discharge.
National standards http://www.pibomo.com/datum/23.html