工欲善其事必先利其器, the first ready tool
Raspberry Pi, (here is the Raspberry Pi 3B +), SD card 8g above, card reader,
1. Download a tool to format the SD card, formatting the SD card https://www.sdcard.org/downloads/formatter_4/eula_windows/
When the download because it is in English translation can be viewed as a Chinese convert, you can slide down directly select "accpet", begin to download and install;
After the installation is complete SD card into the reader, note: to see the location of the disk! ! ! Be sure to come back to see the location of the disk is formatted, or might have other disk formats you can not think of the consequences
2. Download the Win32 DiskImager, which is a mirror image to the SD card http://sourceforge.net/ writing tool projects / win32diskimager /
3. Download Mirror https://www.raspberrypi.org/downloads/
Quguan network can also download additional images,
Insert the SD card into a card reader connected to the computer, ready system image
Open the Win32 Disk Imager on your computer, select the disk where the SD card,
Then select the img file download extract from the point write to the SD card into the system;
This time the software will begin to TF card brush into the operating system, we just need to be patient.
Brush completed, the software will pop writes tips for success
Finally plug in the line, trying to start up your Raspberry Pi, will start when the green light flashes -
The latter can be found in a cell phone with no display or plug adapter connectors can be used raspberry pie
Note: The default user name Raspberry Pi pi, the password is raspberry
We have not yet found the screen, so being the first mentioned here, next time you start connecting Raspberry Pi!