Experimental details of operation of the VLAN configuration

A: Experiment name: VLAN Configuration
II: experimental environment: GNS3-1.3.10
III: Purpose: to deepen the understanding of the VLAN in the course of the experiment, the master VLAN configuration
IV: Procedure:
1: add a router, change it to switch.

2: Add three VPC
3: connect the network cable, and turn on
4: off router routing function
5: 3 for the pc's IP address configuration
6: Test whether interconnection is successful, the success of the next step
respectively pc1 and pc2 "ping "each other
with pc3 go" of ping "PC1
. 7: divided to two VLAN, two methods:
8: Interface configuration:
configuration f1 / 0
the same manner as the configuration f1 / 1 and f1 / 2:
end configuration.
Five: View the role of experiment:
with pc1 to "ping" pc2 and pc3 test
before you can see the scene now can communicate experiment can not be achieved.
We use pc2 to "ping" pc3 try

still can do interoperability.
Six: experimental results: the same between vlan in the same segment can be communication. In different vlan, even if the address on the same network segment, it can not communicate with each other.
Because not a broadcast domain, broadcast ARP can not be used to obtain the MAC address, they can not communicate with each other.