Layer Switch Configuration

Three switches Virtual Interface
Layer switch with routing functionality, so between the two vlan can visit each other, each vlan virtual interface is the network gateway

Three switches Configuration
1. Configuration Commands
Switch (config) routing #ip
2. configure the virtual interface address
Switch (config) # VALN interface VLAN-ID
Switch (config-IF) _address Netmask IP address IP
Switch (config-IF) the shutdown NO

Following experimental environment, enabling communication between different vlan
Layer Switch Configuration

1. pc ip address set to the corresponding
2. The three-port switch sw1 f1 / 1 f1 / 2 f1 / 3 VLAN20 VLAN30 arranged VLAN10
Layer Switch Configuration
. 3 sw1 port to send f1 / 0 to Trunk
Layer Switch Configuration
4. The three switches virtual interface is provided
. Layer Switch Configuration
The switch is provided to three f / 0 port to Trunk
Layer Switch Configuration
. 6 ping pc2 pc3 by experimental tests were pc1Layer Switch Configuration

Guess you like

Origin blog.51cto.com/14449563/2427846