experiment
Note: vlan10-192.168.10.0/24
Vlan20-192.168.20.0 / 24
look back192.168.1.1/32
R2 to R3-192.168.0.0/30
Create valn10 and vlan20 on SW1 and divide port f0/0 to vlan10 , and port f1/2 to vlan20.
Configure routing on SW1 and R2 , which is network interoperability.
Configure DHCP on R1 and DHCP relay on SW1 so that the PC can automatically obtain the IP address and default gateway address.
Can ping the same R1 and lookback on the PC
Set up R2
Create vlan 10 , 20
Add f1/2 and f1/1 to vlan20
Configure the DHCP relay port
Configure IP address
Configure static routing
Placement R1
Configure f0/0IP address
Configure the default route
Configuring vlan10 , 20 of DHCP
Configure R3
Configure IP address
Configure the default route
pcDHCP obtains and verifies the interoperability of the entire network
verification