This method is limited to setting the HP DL580 G7 IPMI address and username and password.
1, the server node, and connected to the monitor and keyboard, and turn
2, this place accidentally deleted the shots, set the IPMI is press F8, into the BIOS is based F9, then wait until the screen when prompted, F9 obvious, F8 needs its own note read, in the bottom of the screen;
3, after pressing the F8, wait a moment that jump to the following screen, this time using the arrow keys to select the button, the cutter "network" option
4, we turn off DHCP, so select "DNS / DHCP"
Cut to "DHCP enable" use the spacebar to select, "OFF" represents the closed DHCP, static IP address.
5, do not worry set the IP, because the HP IPMI Settings again the same great option to switch is too much trouble, first create a user come back to set IP, click the "setting", enter a new user in a new pop-up window, such as in "user name" and "login name" to enter admin, and then in the "password" and "verify password" password, no less than eight characters, press F10 to save.
6, and then cut to "network" of "NIC and TCP / IP" fill in the IP address
7, fill in the IP address, subnet mask and gateway in the pop, press F10 to save
8, then cut to "file" select "exit" to exit
OK, it ended.
Reproduced in: https://blog.51cto.com/tianhunyongheng/1788020