The HP server ilo does not manage IP by default. It uses DHCP to get the address. The original HP server checks the information and says to change the ilo address by pressing F1, but the machine does not have this item when it starts. Use DHCP to assign the address to the ilo, which is clearly in the DHCP. -You can see the ilo's mac and assigned IP on the server, but it just can't be managed. Does it need to be restarted? I haven't tested it! This time it's a record!
1. Press F9 setup-this is indeed to enter bios, there is no link to enter ilo.
2. Press F10 Intelligent Provisioning ----This is it! ! !
There is everything in this one! raid management, fault log, firmware upgrade-of course, iLO configuration Utility is
changed to a fixed IP, restart after application, and it's done! !
Connect the network cable from the iLO management port to the laptop, change the local IP to the same network segment as the iLO management IP, visit: https://192.168.10.110, the user name and password are pasted on the shell in the upper left corner of the server, the access result is as follows:
still ilo management is cool !
