Copyright: Attribution, allow others to create paper-based, and must distribute paper (based on the original license agreement with the same license Creative Commons )
Raspberry Pi development environment to build
Basic tools software download
1, a raspberry pie
this should not have to say, as to buy a Chinese version or the British version, see their hobby. THERE IS NO DIFFERENCE, but different origin. As for version, we recommend the latest +. 3B
2, memory card, Shunpian Mai readers
my personal buy is 32G, and bigger just in case. Recommended to buy big brands, C10, especially cheap slow, get stuck cry.
3, download Raspberry Pi system
https://www.raspberrypi.org/downloads/
selected here is with the desktop. The most complete, after you install it, is a complete desktop linux system.
4, programming software
https://www.balena.io/etcher/
recommended etcher entirely official website feelings recommended +
5, the power
the Internet to buy a Raspberry Pi power, preferably with a switch. Amount, to be honest, cell phone charging head can, however, make you a professional point, after all, this is a professional matter.
6, XShell software
https://xshell.en.softonic.com/
This guy used to connect the Raspberry Pi. Of course, you can use other software.
7, Advanced IP Scanner software
that cargo is IP scanner for scanning ip address raspberry pie. By the way, remember to prepare the network cable Oh, it should Raspberry Pi to access the LAN. Bah, it means plug in your router.
Now to make it
1, SD card into the reader, plug in the computer
2, open your burning software etcher, the Raspberry Pi system programmed into it.
Usually the default disk is correct, but it is recommended to check.
Downloaded Raspberry Pi system does not require decompression, etcher will automatically recognize the files inside.
In short, dry're done!
3. After the installation, you will find that your card is divided into two, and one called BOOT, a not open .
Establish a empty file called SSH, attention must be no suffix under BOOT. If not, the proposed wall.
4, the memory card is inserted into dispatch raspberry, raspberry sent to the network cable plug, the cable connected to the router. Note that the computer and raspberry pie to a local area network.
5, open your installed Advanced IP Scanner software
so that we can see the address bar raspberry pie.
6, open your XShell now
File - New to create a new connection, is connected to the raspberry pie.
Fill these things, you can determine a connection.
7. Enter your account number and password Raspberry Pi
the initial landing will call you enter the account and password. Account number is pi, the password is Raspberry
8, as to set the language I will not say anything online there. I was more just directly connect the monitor, into the desktop settings. Haha
talk about setting the time zone it, if you do not get to the desktop, open connections in XShell input window:
sudo dpkg-reconfigure tzdata
Then you can set the time zone
Then set up on the line.
He speaks a little digression
Raspberry Pi is a computer, switch off the power or not to choose direct pull cord, used strictly command is the best. #