zabbix3.4 added Huawei (Wah) switch

Disclaimer: This article is a blogger original article, shall not be reproduced without the bloggers allowed. https://blog.csdn.net/tladagio/article/details/89468173

zabbix Version: 3.4

A, zabbix configuration

1, add a host group, similar devices on the same host group inside

2, Configuration - Host - Create Host

3, add the switch IP address

4, link template, here choose Huawei SNMPv2

5. Set the community name, keep up the same switch

Second, the switch configuration

1, switches, 192.168.14.15 is the IP address zabbix server, and keep up the same community name set in zabbix

<SW30>system-view 
[SW30]snmp-agent
[SW30]snmp-agent community read zabbix@123
[SW30]snmp-agent sys-info version all
[SW30]snmp-agent target-host trap address udp-domain 192.168.14.15 udp-port 161 params securityname  zabbix@123 v2c 
[SW30]snmp-agent trap enable

Third, the validation results

1, in zabbix page to see the status: Enabled

2, later on it will automatically generate graphics