https://blog.csdn.net/DeepWolf/article/details/88640937
Data in this chapter of the pit and the corresponding solutions TX2 Brush and Brush processes encountered in the process to be a record, in order to be a reference to brush machine again. If you happen to receive TX2 Developer's Kit, there is no out of the box, then please move to my previous blog boot up test of TX2. Blog link: https: //blog.csdn.net/DeepWolf/article/details/88636905
nonsense to say so much, then followed me to start brushing machine trip it TX2
1) before the machine is ready to brush
(1) fitted ubuntu16.04 computer (host), because JetPack3.3 system support is 16.04, we want to install. Remember to leave a host of free space bigger.
2) Download JetPack3.3, detailed steps are as follows
(1) Download: https: //developer.nvidia.com/embedded/jetpack
after (2) the download page select the following option to the next page
(3) Click to enter the download the following options
under (4) click on Ubuntu (64-bit) to enter the item, you need to register to log
(5) have to login account, the account will not register, the interface as shown below
3) modify the Ubuntu system comes with software source
(1) the source modification Ubuntu system comes to internal source, the source link USTC: HTTPS: //mirrors.ustc.edu.cn/repogen/
(2) enter a command at the terminal of the backup source Ubuntu comes
sudo /etc/apt/sources.list /etc/apt/sources.list.bak CP
(. 3) in order to enter the following terminal Ubuntu replace the original source of the source of domestic appeal
gedit /etc/apt/sources.list sudo
(4) Enter the following command in the terminal to make the changes effective
sudo APT-GET Update
4) JetPack installation
(1) into your store to download JetPack package folder, enter in a terminal the following command to change permissions
chmod + x ./JetPack-L4T-3.3-linux-x64_b39.run
then execute the following command input terminal (2) is mounted
sudo ./JetPack-L4T-3.3-linux-x64_b39.run
practical operational effects as follows FIG, pop-up window appears -Error.
Do not worry, reason is that permission has been changed before, here again using sudo will error, so we do not use sudo command to execute the final actual diagram as shown below.
(3) on the pop-up page, click Next appear the following page
(4) continue to click Next appear the following page
(5) Select "Jetson TX2" continue to click on the following page Next appears
(6) Select the "full" option, then continue to click Next page appears as follows
(7) all accept, continue to click Next, the following page appears
(8) to enter the password. Continue to click Next, the following screen appears
(9) or the like downloaded, continue to click Next appears the following interface
(10) continue to click Next the following screen appears
as shown in (11) FIG choice, this time using a network cable and TX2 a host connected to the same router, and the following can ping ping, the following specific actual FIG.
The following interface (12) continues to tap operation (10) occurs Next
(13) select the default, continue to click Next appears the following interface
(14) continue to click Next appears the following interface
(15) At this time, TX2 off, and the host and connected microUSB TX2 development board, TX2 and then power is turned on, followed by pressing the button TX2 RECOVERY let go of, and then press the RESET button and let go RECOVERY two seconds and then release the button. According to a certain order. Specific physical map is too simple, make up your own brain. FIG TX2 interface posted below.
(16) reopened a terminal, enter the command: lsusb, to see if a prior "NVIDIA Corpration" equipment, such as would indicate that the mode has been successfully entered Recovery. Actual FIG follows
(17) after successful Recovery Mode, we carried out the following interface terminal press the Enter subsequent operation
(18) begins Brush later in (17) performing the operation, this period is to wait, and then in the process of waiting encountered no unexpected pit below, the host IP address has been searching TX2 can not continue. But this time you host and TX2 is able to ping each other, and then they covered you, I do not know Zaban. Do not worry, behind style all their own.
When (19) appears pit appeal, we first do not choose option 2, on the TX2 system, we enter the home document by the existing "report_ip_ to_host.sh", we open the file with authority in the terminal, and write in a file inside IP address of the host. TX2 terminal then performs the following command to the host side performs Retry appeal solve the problem, then performs the remaining Brush work.
(20) will jump out immediately following problems in the implementation process, the display can not be installed on the TX2 cuda, which we can not be happy, you will not let me install cuda, that I used to TX2 what is the use, right Since this way can not be installed, then we went to the top TX2 follow the prompts to install their own. Those who encounter this situation we have come to a similar TX2 above, according to his own prompts to install can be solved.
(21) after the operation is completed while such appeals will eventually enter the following interface, then, congratulations, you have to brush machine successfully. Hey you can go up.
(22) close Appeals terminal, do not remove the downloaded file, just in case we still have to brush it several times, click Finish to exit the finish.
At this point, all of Brush completed successfully, congratulations from entering the pit embedded artificial intelligence developed to readily play and enjoy this cool world of it.
---------------------
Author: Love giggle pig
Source: CSDN
Original: https: //blog.csdn.net/DeepWolf/article/details/88640937
copyright Disclaimer: This article is a blogger original article, reproduced, please attach Bowen link!