Win 7 system only (verified) 1, the administrator permission to open the Command Prompt window. 2, additional virtual NICs: netsh wlan set hostednetwork mode = allow ssid = (wireless network name) key = (password) 3, the adapter can access the network, enable the "Internet Connection Sharing (ICS)". NIC selected for the two additional virtual NICs. 4, turn on the radio card 2 commands: netsh wlan start hostednetwork 5, to access the two named network object value of ssid. Part 2 above command Parameter Meaning :( not verified) Mode: Whether to enable virtual Wifi card, was changed to disallow disabled virtual network card will disappear. Ssid: Specifies the name of the wireless network, preferably in English. Key: Specifies the password for the wireless network. The password for the wireless network WPA2 encryption for secure, very good to prevent rub network. In fact, these three parameters can be used alone, for example, uses only mode = disallow can disable the virtual Wifi card Transfer from: http: //my.oschina.net/lvcreator/blog/200949
Reproduced in: https: //my.oschina.net/766/blog/211272