1. Set printer sharing;
"Start" → "Control Panel" → "Devices and Printers"
2. Locate the "View devices and printers"
3. Set up printer sharing
4. FIG. Press, sharing their name can easily set up;
5. Open Guest user; click "My Computer" choose "Management (G)"
FIG. 6. Press the operation;
7. Set up a firewall allows file and print sharing
Open the Control Panel, click "System and Security"
Find the "Allow a program through Windows Firewall"
Set as shown below;
8.windows security settings,
Open the Control Panel, or "System and Security" inside
Find "Administrative Tools"
Double-click to open the "Local Security Policy"
Then, set as shown below
"Deny access to this computer from the network" inside deleted Guest,
9. "Network access: local account sharing and security model" is set to "Guest only" mode;
Can be set as shown below:
10. The above printer sharing set. Need to connect a computer printer, press the windows + r shortcut to open the "Run"
Locate the shared printer, double slash \ is connected to the printer behind the IP address of that computer.
Double-click the printer icon, and install the driver.
If the computer is connected to the printer 32, your computer is 64, then the first run it on your computer's printer driver, and then on the line, turn the same.
If the bit error,
Please restart the "Print Spooler" service, right-click "My Computer" choose "management (G)", restart the service, see the figure
In addition, unsuccessful, then check whether the computers in the same workgroup (if did not seem to affect the same domain), the same as if the computer's DNS (possible impact).
